P0335 2007 Toyota Prius Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2007 Toyota Prius indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2007 Toyota Prius Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2007 Toyota Prius?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2007 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2007 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2007 Toyota Prius code?
Need more information on how to fix the P0335 2007 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2007 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2007 Toyota Prius Code
1. What are the common symptoms of OBDII code P0335 in a 2007 Toyota Prius?
- Common symptoms include engine stalling, rough idling, difficult starting, or a reduction in engine performance.
2. What does the OBDII code P0335 indicate in a 2007 Toyota Prius?
- OBDII code P0335 indicates a problem with the crankshaft position sensor 'A' circuit in the vehicle.
3. What are the possible causes of OBDII code P0335 in a 2007 Toyota Prius?
- Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a problem with the sensor circuit.
4. How can I diagnose the issue causing OBDII code P0335 in my 2007 Toyota Prius?
- Diagnosing the issue involves checking the crankshaft position sensor for proper operation, inspecting the sensor wiring for damage, and testing the sensor circuit for continuity.
5. Can I still drive my 2007 Toyota Prius with OBDII code P0335 present?
- It is not recommended to drive the vehicle with OBDII code P0335 present, as it can lead to further engine performance issues and potential stalling.
6. How can the crankshaft position sensor 'A' circuit issue be repaired in a 2007 Toyota Prius?
- Repairing the issue may involve replacing the faulty crankshaft position sensor, repairing damaged wiring, ensuring proper electrical connections, or resetting the fault code after repairs.
7. Are there any DIY tips for fixing OBDII code P0335 in a 2007 Toyota Prius?
- While checking the sensor wiring and connections can be done by DIY enthusiasts, replacing the crankshaft position sensor may require professional assistance due to its location and complexity.
8. How important is it to address OBDII code P0335 promptly in a 2007 Toyota Prius?
- It is important to address OBDII code P0335 promptly to prevent potential engine issues, poor performance, or stalling while driving.
9. Can a faulty crankshaft position sensor cause other problems in a 2007 Toyota Prius?
- Yes, a faulty crankshaft position sensor can lead to other issues such as incorrect ignition timing, reduced fuel efficiency, and potential damage to the engine.
10. Is it recommended to clear the OBDII code P0335 in a 2007 Toyota Prius after repairing the issue?
- Yes, after repairing the crankshaft position sensor 'A' circuit problem, it is recommended to clear the fault code using an OBDII scanner to reset the system and ensure the issue has been resolved.
Discuss the causes and fixes for P0335 2007 Toyota Prius OBDII Code
Code P0335 2007 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
