AutoCodes – Toyota – P0335 2007 Toyota Highlander

P0335 2007 Toyota Highlander Code - Crankshaft Position Sensor 'A' Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2007 Toyota Highlander indicates Crankshaft Position Sensor 'A' Circuit .
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,331

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2007 Toyota Highlander Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2007 Toyota Highlander - Crankshaft Position Sensor 'A' Circuit - AutoCodes.com — P0335 2007 Toyota Highlander Code - Crankshaft Position Sensor 'A' Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2007 Toyota Highlander?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2007 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2007 Toyota Highlander code?

Need more information on how to fix the P0335 2007 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2007 Toyota Highlander Code

1. What are the common symptoms of OBDII code P0335 in a 2007 Toyota Highlander?

- Common symptoms include engine misfires, rough idling, stalling, and difficulty starting the vehicle.

2. What does the OBDII code P0335 indicate in a 2007 Toyota Highlander?

- The code P0335 indicates a problem with the Crankshaft Position Sensor 'A' Circuit.

3. What are the possible causes of OBDII code P0335 in a 2007 Toyota Highlander?

- Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a problem with the sensor circuit.

4. How can I diagnose the issue causing OBDII code P0335 in my 2007 Toyota Highlander?

- You can diagnose the issue by checking the sensor's wiring and connections, testing the sensor with a multimeter, and inspecting the sensor for any physical damage.

5. Can I still drive my 2007 Toyota Highlander with OBDII code P0335?

- It is not recommended to drive the vehicle with code P0335 as it can lead to further engine damage and potential safety hazards.

6. How can I repair OBDII code P0335 in my 2007 Toyota Highlander?

- The repair typically involves replacing the faulty crankshaft position sensor, repairing damaged wiring or connections, and clearing the trouble codes.

7. Is it possible to reset OBDII code P0335 in a 2007 Toyota Highlander without fixing the issue?

- While you can clear the code temporarily, it is not recommended as the underlying issue causing the code will persist and may lead to more severe problems.

8. How much does it cost to fix OBDII code P0335 in a 2007 Toyota Highlander?

- The cost of fixing code P0335 can vary depending on the root cause, but it generally involves the cost of a new sensor and any necessary repairs or labor charges.

9. Are there any preventative measures to avoid OBDII code P0335 in a 2007 Toyota Highlander?

- Regular maintenance, such as checking the sensor's condition during tune-ups and addressing any engine performance issues promptly, can help prevent code P0335 from appearing.

10. Can a DIY enthusiast fix OBDII code P0335 in a 2007 Toyota Highlander?

- While it is possible for experienced DIY enthusiasts to replace the crankshaft position sensor, it is recommended to consult a professional mechanic for accurate diagnosis and repair.