AutoCodes – Nissan – P0335 2007 Nissan Xterra

P0335 2007 Nissan Xterra Code - Crankshaft Position Sensor Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2007 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,215

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2007 Nissan Xterra Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2007 Nissan Xterra - Crankshaft Position Sensor Circuit - AutoCodes.com — P0335 2007 Nissan Xterra Code - Crankshaft Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2007 Nissan Xterra?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2007 Nissan Xterra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

2005 Xterra Crankshaft Position Sensor Replacement

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2007 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2007 Nissan Xterra code?

Need more information on how to fix the P0335 2007 Nissan Xterra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2007 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2007 Nissan Xterra Code

1. What does OBDII code P0335 on a 2007 Nissan Xterra indicate?

The code P0335 indicates a problem with the crankshaft position sensor circuit in the vehicle.

2. What are the common symptoms of a P0335 code in a 2007 Nissan Xterra?

Common symptoms include engine stalling, difficulty starting the engine, misfiring, and a decrease in fuel efficiency.

3. What are some possible causes of the P0335 code in a 2007 Nissan Xterra?

Possible causes can include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine's timing system.

4. How can I diagnose the cause of a P0335 code in my 2007 Nissan Xterra?

Diagnosis typically involves checking the connections and wiring of the crankshaft position sensor, testing the sensor's resistance, and inspecting the sensor for any physical damage.

5. Can I still drive my 2007 Nissan Xterra with a P0335 code?

It is not recommended to drive the vehicle with a P0335 code as it can lead to engine performance issues and potential safety concerns.

6. How can I repair a P0335 code in my 2007 Nissan Xterra?

Repairing a P0335 code often involves replacing the crankshaft position sensor, repairing or replacing damaged wiring, and ensuring proper connections in the sensor circuit.

7. Is it possible to reset the P0335 code in a 2007 Nissan Xterra without fixing the issue?

While clearing the code may temporarily turn off the check engine light, it will not solve the underlying problem causing the P0335 code.

8. How much does it typically cost to repair a P0335 code in a 2007 Nissan Xterra?

The cost of repairs can vary depending on the specific issue causing the P0335 code, but it may range from $100 to $300 for parts and labor.

9. Can a P0335 code in a 2007 Nissan Xterra be prevented?

Regular maintenance, such as checking and replacing the crankshaft position sensor at recommended intervals, can help prevent the occurrence of a P0335 code.

10. What other codes may be related to a P0335 code in a 2007 Nissan Xterra?

Codes related to engine timing, such as P0336 (Crankshaft Position Sensor A Circuit Range/Performance) or P0337 (Crankshaft Position Sensor A Circuit Low Input), may also be triggered alongside a P0335 code.