AutoCodes – Nissan – P0335 2007 Nissan Maxima

P0335 2007 Nissan Maxima Code - Crankshaft Position Sensor Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2007 Nissan Maxima indicates Crankshaft Position Sensor Circuit.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,397

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2007 Nissan Maxima Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2007 Nissan Maxima - Crankshaft Position Sensor Circuit - AutoCodes.com — P0335 2007 Nissan Maxima Code - Crankshaft Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2007 Nissan Maxima?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2007 Nissan Maxima?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2007 Nissan Maxima code?

Need more information on how to fix the P0335 2007 Nissan Maxima code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2007 Nissan Maxima Code

1. What does OBDII code P0335 indicate on a 2007 Nissan Maxima?

- Code P0335 indicates that there is a fault in the crankshaft position sensor circuit, suggesting that the sensor or its wiring may be malfunctioning.

2. What are the common symptoms of code P0335 in a 2007 Nissan Maxima?

- Symptoms include difficulty starting the engine, intermittent stalling, rough engine performance, and the Check Engine Light turning on.

3. What can cause the P0335 code to appear on a 2007 Nissan Maxima?

- Possible causes include a faulty crankshaft position sensor, damaged wiring to the sensor, corrosion in the sensor connector, or a malfunctioning Engine Control Module (ECM).

4. How is the P0335 code diagnosed in a 2007 Nissan Maxima?

- Diagnosis involves using a scan tool to confirm the code, visually inspecting the sensor and its connections for damage, and checking the sensor's output with an oscilloscope or multimeter.

5. What are the steps to repair the P0335 code on a 2007 Nissan Maxima?

- Repair steps typically include replacing the crankshaft position sensor, repairing or replacing damaged wiring, cleaning corrosion from connectors, and, if all else fails, replacing the ECM.

6. How critical is it to address the P0335 code in a 2007 Nissan Maxima?

- It is critical to address this code promptly as it can lead to engine performance issues, increased fuel consumption, and potential engine damage from misfires.

7. Can driving a 2007 Nissan Maxima with a P0335 code cause further vehicle damage?

- Yes, driving with this code can cause further damage to the engine due to irregular engine timing, which may lead to increased wear and tear on engine components.

8. What tools are needed to diagnose the P0335 code on a 2007 Nissan Maxima?

- Tools needed include an OBD-II scanner, a digital multimeter, and possibly an oscilloscope to measure the sensor's waveform output.

9. Is it possible for a P0335 code to clear itself in a 2007 Nissan Maxima?

- It is unlikely for the P0335 code to clear itself without addressing the underlying issue, as it typically indicates a hardware failure or electrical problem.