P0335 2006 Nissan Xterra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2006 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2006 Nissan Xterra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2006 Nissan Xterra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2006 Nissan Xterra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2005 Xterra Crankshaft Position Sensor Replacement
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2006 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2006 Nissan Xterra code?
Need more information on how to fix the P0335 2006 Nissan Xterra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2006 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2006 Nissan Xterra Code
1. What does OBDII code P0335 mean for a 2006 Nissan Xterra?
The code P0335 indicates a problem with the crankshaft position sensor circuit in a 2006 Nissan Xterra.
2. What are the common symptoms of a P0335 code in a 2006 Nissan Xterra?
Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
3. What are some possible causes of the P0335 code in a 2006 Nissan Xterra?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.
4. How can I diagnose the P0335 code in my 2006 Nissan Xterra?
Diagnosing the P0335 code may involve checking the sensor's wiring and connectors for damage, testing the sensor's output signal, and inspecting the sensor's physical condition.
5. Can a faulty crankshaft position sensor cause other issues in a 2006 Nissan Xterra?
Yes, a faulty crankshaft position sensor can lead to issues such as misfires, poor engine performance, and problems with the vehicle's transmission.
6. Is it safe to continue driving with a P0335 code in a 2006 Nissan Xterra?
It is not recommended to continue driving with a P0335 code, as it can cause further damage to the engine and other components of the vehicle.
7. How can I repair a P0335 code in my 2006 Nissan Xterra?
Repairing a P0335 code may involve replacing the crankshaft position sensor, repairing damaged wiring or connectors, and clearing the code with an OBDII scanner.
8. Are there any preventive measures to avoid the P0335 code in a 2006 Nissan Xterra?
Regularly maintaining the vehicle, checking the sensor's condition during routine inspections, and addressing any engine performance issues promptly can help prevent the P0335 code.
9. Can a DIY enthusiast fix the P0335 code in a 2006 Nissan Xterra?
Depending on the DIYer's skill level and access to tools, it may be possible to replace the crankshaft position sensor or repair wiring issues associated with the P0335 code.
10. How much does it typically cost to repair a P0335 code in a 2006 Nissan Xterra?
The cost of repairing a P0335 code can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0335 2006 Nissan Xterra OBDII Code
Code P0335 2006 Nissan Xterra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
