AutoCodes – Nissan – P0335 2006 Nissan Sentra

P0335 2006 Nissan Sentra Code - Crankshaft Position Sensor Circuit

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0335 2006 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,454

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0335 2006 Nissan Sentra Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0335 2006 Nissan Sentra - Crankshaft Position Sensor Circuit - AutoCodes.com — P0335 2006 Nissan Sentra Code - Crankshaft Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC P0335 2006 Nissan Sentra?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0335 2006 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 2006 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 2006 Nissan Sentra code?

Need more information on how to fix the P0335 2006 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 2006 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 2006 Nissan Sentra Code

1. What does OBDII code P0335 mean for a 2006 Nissan Sentra?

The P0335 code on a 2006 Nissan Sentra indicates a problem with the crankshaft position sensor circuit.

2. What are common symptoms of a P0335 code in a 2006 Nissan Sentra?

Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.

3. What are possible causes of a P0335 code in a 2006 Nissan Sentra?

Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.

4. How can I diagnose the cause of a P0335 code in my 2006 Nissan Sentra?

Diagnosing a P0335 code typically involves checking the crankshaft position sensor's wiring and connectors, inspecting the sensor for damage, and testing its operation with a multimeter.

5. Can I drive my 2006 Nissan Sentra with a P0335 code?

It is not recommended to drive your vehicle with a P0335 code, as it can lead to more serious engine problems and potential safety hazards.

6. How can I repair a P0335 code in my 2006 Nissan Sentra?

Repairing a P0335 code may involve replacing the crankshaft position sensor, repairing damaged wiring or connectors, or realigning the sensor for proper operation.

7. Are there any DIY tips for fixing a P0335 code in a 2006 Nissan Sentra?

While some DIY enthusiasts may attempt to replace the crankshaft position sensor themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair.

8. How much does it cost to fix a P0335 code in a 2006 Nissan Sentra?

The cost of fixing a P0335 code can vary depending on the cause of the issue, but it typically ranges from $100 to $300 for parts and labor.

9. Can a P0335 code in a 2006 Nissan Sentra cause other problems if left unrepaired?

Yes, leaving a P0335 code unaddressed can lead to more severe engine issues, potential damage to other components, and an increased risk of engine failure.

10. How long does it take to repair a P0335 code in a 2006 Nissan Sentra?

The repair time for a P0335 code can vary based on the exact cause of the issue, but it typically takes a few hours to complete the diagnosis and replacement of the crankshaft position sensor.