P0335 2005 Toyota Prius Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2005 Toyota Prius indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2005 Toyota Prius Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2005 Toyota Prius?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2005 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2005 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2005 Toyota Prius code?
Need more information on how to fix the P0335 2005 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2005 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2005 Toyota Prius Code
1. What are the common symptoms of OBDII code P0335 in a 2005 Toyota Prius?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 indicate in a 2005 Toyota Prius?
- This code indicates a problem with the crankshaft position sensor 'A' circuit in the vehicle.
3. What are some possible causes of OBDII code P0335 in a 2005 Toyota Prius?
- Potential causes include a faulty crankshaft position sensor, damaged sensor wiring, a loose connector, or issues with the sensor circuit.
4. How can I diagnose the issue causing OBDII code P0335 in my 2005 Toyota Prius?
- Diagnosing the problem may involve checking the sensor wiring for damage, testing the sensor's resistance, and using a scan tool to monitor sensor data.
5. Is it safe to continue driving with OBDII code P0335 in a 2005 Toyota Prius?
- It is not recommended to drive the vehicle with this code present, as it can lead to more severe engine issues and potential breakdowns.
6. Can a DIY enthusiast repair OBDII code P0335 in a 2005 Toyota Prius?
- While some may attempt to replace the crankshaft position sensor themselves, it is recommended to have a professional mechanic diagnose and repair the issue to ensure proper installation.
7. How much does it typically cost to repair OBDII code P0335 in a 2005 Toyota Prius?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $150 to $300 for parts and labor.
8. Are there any preventive measures to avoid OBDII code P0335 in a 2005 Toyota Prius?
- Regular maintenance, such as checking and replacing the crankshaft position sensor at recommended intervals, can help prevent this code from appearing.
9. Can a faulty crankshaft position sensor cause other problems in a 2005 Toyota Prius?
- Yes, a faulty sensor can cause issues with engine timing, fuel delivery, and ignition, leading to poor performance and potential engine damage.
10. How long does it take to repair OBDII code P0335 in a 2005 Toyota Prius?
- The repair time can vary depending on the exact cause of the issue and the mechanic's experience, but it typically takes around 1-2 hours to diagnose and replace the crankshaft position sensor.
Discuss the causes and fixes for P0335 2005 Toyota Prius OBDII Code
Code P0335 2005 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
