P0335 2005 Nissan Xterra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2005 Nissan Xterra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2005 Nissan Xterra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2005 Nissan Xterra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2005 Nissan Xterra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2005 Xterra Crankshaft Position Sensor Replacement
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2005 Nissan Xterra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2005 Nissan Xterra code?
Need more information on how to fix the P0335 2005 Nissan Xterra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2005 Nissan Xterra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2005 Nissan Xterra Code
1. What are the common symptoms of OBDII code P0335 on a 2005 Nissan Xterra?
The common symptoms include engine misfires, rough idling, stalling, difficulty starting the vehicle, and a decrease in overall engine performance.
2. What can cause the P0335 code to appear on a 2005 Nissan Xterra?
The P0335 code on a 2005 Nissan Xterra is typically triggered by a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or a problem with the sensor's circuit.
3. How can I diagnose the cause of the P0335 code on my 2005 Nissan Xterra?
Diagnosing the P0335 code involves checking the crankshaft position sensor's wiring and connections for any damage, testing the sensor's functionality using a multimeter, and inspecting the sensor's position and alignment.
4. Can I drive my 2005 Nissan Xterra with the P0335 code present?
It is not recommended to drive your 2005 Nissan Xterra with the P0335 code present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
5. How can I repair the P0335 code on my 2005 Nissan Xterra?
The most common repair for the P0335 code on a 2005 Nissan Xterra is to replace the faulty crankshaft position sensor. Ensure to use an OEM or high-quality replacement sensor for optimal performance.
6. Will resetting the OBDII code P0335 on my 2005 Nissan Xterra make it go away permanently?
Resetting the OBDII code P0335 on your 2005 Nissan Xterra may temporarily clear the code, but if the underlying issue with the crankshaft position sensor or its circuit is not addressed, the code is likely to reappear.
7. Are there any tips to prevent the recurrence of the P0335 code on my 2005 Nissan Xterra?
To prevent the recurrence of the P0335 code, regularly inspect and maintain the crankshaft position sensor, ensure proper wiring connections, and address any engine performance issues promptly.
8. Can a DIY enthusiast replace the crankshaft position sensor on a 2005 Nissan Xterra?
Replacing the crankshaft position sensor on a 2005 Nissan Xterra can be a moderately challenging task. DIY enthusiasts with the necessary tools, knowledge, and experience may be able to replace the sensor successfully.
9. Is it necessary to clear the OBDII code P0335 after replacing the crankshaft position sensor on a 2005 Nissan Xterra?
After replacing the crankshaft position sensor on a 2005 Nissan Xterra, it is recommended to clear the OBDII code P0335 using an OBDII scanner to ensure the ECM recognizes the repair and resets the check engine light.
10. How much does it cost to replace the crankshaft position sensor on a 2005 Nissan Xterra?
The cost of replacing the crankshaft position sensor on a 2005 Nissan Xterra can vary depending on the quality of the sensor and labor costs. On average, the total cost can range from $100 to $300, including parts and labor.
Discuss the causes and fixes for P0335 2005 Nissan Xterra OBDII Code
Code P0335 2005 Nissan Xterra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
