P0335 2005 Nissan Maxima Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2005 Nissan Maxima indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2005 Nissan Maxima Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2005 Nissan Maxima?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2005 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2005 Nissan Maxima code?
Need more information on how to fix the P0335 2005 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2005 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0335 in a 2005 Nissan Maxima?
- Common symptoms include engine stalling, difficulty starting the engine, rough idling, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 indicate in a 2005 Nissan Maxima?
- OBDII code P0335 indicates a malfunction in the crankshaft position sensor circuit.
3. What are the possible causes of OBDII code P0335 in a 2005 Nissan Maxima?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment or installation.
4. How can I diagnose the cause of OBDII code P0335 in my 2005 Nissan Maxima?
- You can diagnose the issue by checking the sensor's wiring and connectors for damage, testing the sensor's resistance, and ensuring proper alignment and installation.
5. Can I drive my 2005 Nissan Maxima with OBDII code P0335?
- It is not recommended to drive your vehicle with OBDII code P0335 as it can lead to engine performance issues and potential stalling, which can be dangerous.
6. How can I repair OBDII code P0335 in my 2005 Nissan Maxima?
- The repair typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper sensor alignment and installation.
7. Do I need special tools to fix OBDII code P0335 in my 2005 Nissan Maxima?
- Basic tools such as a wrench or socket set may be needed to access and replace the crankshaft position sensor, but no special tools are typically required for this repair.
8. Can a DIY enthusiast fix OBDII code P0335 in a 2005 Nissan Maxima?
- Yes, a DIY enthusiast with some mechanical knowledge and the right tools can typically replace the crankshaft position sensor and address wiring issues related to OBDII code P0335.
9. How much does it cost to repair OBDII code P0335 in a 2005 Nissan Maxima?
- The cost of repairing OBDII code P0335 can vary depending on the extent of the issue, but typically, the cost ranges from $100 to $300 for parts and labor.
10. Will resetting the OBDII code P0335 in my 2005 Nissan Maxima make it go away permanently?
- Resetting the code may temporarily clear the error, but if the underlying issue, such as a faulty sensor or wiring problem, is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0335 2005 Nissan Maxima OBDII Code
-
This are nice informations.... is it the sensor that also makes the gear to jack heavy when it start hard? regards.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
