P0335 2004 Nissan Maxima Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2004 Nissan Maxima indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2004 Nissan Maxima Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2004 Nissan Maxima?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2004 Nissan Maxima code?
Need more information on how to fix the P0335 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2004 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0335 in a 2004 Nissan Maxima?
The common symptoms of code P0335 in a 2004 Nissan Maxima include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What can cause the OBDII code P0335 in a 2004 Nissan Maxima?
The most common cause of code P0335 in a 2004 Nissan Maxima is a faulty crankshaft position sensor or a damaged sensor wiring harness.
3. How does the crankshaft position sensor affect the engine in a 2004 Nissan Maxima?
The crankshaft position sensor is crucial for providing the engine control module with information about the crankshaft's position and speed, which is essential for proper ignition timing and fuel injection.
4. Can a faulty crankshaft position sensor cause permanent damage to a 2004 Nissan Maxima's engine?
While a faulty crankshaft position sensor itself won't cause permanent damage to the engine, it can lead to issues like poor performance and potential engine stalling if not addressed promptly.
5. How can I diagnose a faulty crankshaft position sensor in my 2004 Nissan Maxima?
Diagnosing a faulty crankshaft position sensor involves using an OBDII scanner to retrieve the trouble code, checking the sensor's wiring harness for damage, and testing the sensor's resistance with a multimeter.
6. What are some repair tips for fixing OBDII code P0335 in a 2004 Nissan Maxima?
Repairing code P0335 in a 2004 Nissan Maxima typically involves replacing the faulty crankshaft position sensor and ensuring the sensor's wiring harness is in good condition.
7. Can I drive my 2004 Nissan Maxima with OBDII code P0335?
It is not recommended to drive your 2004 Nissan Maxima with code P0335 for an extended period as it can lead to potential engine stalling and other performance issues.
8. How much does it cost to repair OBDII code P0335 in a 2004 Nissan Maxima?
The cost of repairing code P0335 in a 2004 Nissan Maxima can vary depending on labor rates and parts costs, but it typically ranges from $150 to $300 for the sensor replacement.
9. Are there any preventive measures to avoid OBDII code P0335 in a 2004 Nissan Maxima?
Regular maintenance, such as checking and replacing the crankshaft position sensor at recommended intervals, can help prevent code P0335 in a 2004 Nissan Maxima.
10. Can a DIY enthusiast repair OBDII code P0335 in a 2004 Nissan Maxima?
While replacing the crankshaft position sensor can be a DIY-friendly repair, it's essential to have the necessary tools and knowledge to ensure proper installation and avoid causing further damage.
Discuss the causes and fixes for P0335 2004 Nissan Maxima OBDII Code
Code P0335 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
