P0335 2003 Nissan Sentra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2003 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2003 Nissan Sentra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2003 Nissan Sentra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2003 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2003 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2003 Nissan Sentra code?
Need more information on how to fix the P0335 2003 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2003 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2003 Nissan Sentra Code
1. What are the common symptoms of OBDII code P0335 in a 2003 Nissan Sentra?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and poor acceleration.
2. What does OBDII code P0335 indicate in a 2003 Nissan Sentra?
- OBDII code P0335 indicates a malfunction in the crankshaft position sensor circuit of the vehicle.
3. What are the possible causes of OBDII code P0335 in a 2003 Nissan Sentra?
- Possible causes include a faulty crankshaft position sensor, damaged sensor wiring, poor electrical connections, or a malfunctioning engine control module (ECM).
4. How can I diagnose the issue causing OBDII code P0335 in my 2003 Nissan Sentra?
- You can diagnose the issue by checking the condition of the crankshaft position sensor, inspecting the sensor wiring for damage, and testing the sensor's electrical connections for proper voltage and continuity.
5. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?
- In most cases, a faulty crankshaft position sensor will need to be replaced rather than repaired.
6. Are there any repair tips for fixing OBDII code P0335 in a 2003 Nissan Sentra?
- When replacing the crankshaft position sensor, make sure to use a high-quality OEM or aftermarket sensor to ensure proper functioning of the engine.
7. Is it safe to continue driving a 2003 Nissan Sentra with OBDII code P0335?
- It is not recommended to continue driving the vehicle with OBDII code P0335, as it can lead to more serious engine issues and potential breakdowns.
8. Can OBDII code P0335 be cleared/reset without fixing the underlying issue in a 2003 Nissan Sentra?
- Clearing or resetting the code without fixing the underlying issue will only temporarily turn off the check engine light and will not solve the problem causing the code.
9. How much does it typically cost to repair OBDII code P0335 in a 2003 Nissan Sentra?
- The cost of repairing OBDII code P0335 can vary depending on the cause of the issue, but it generally ranges from $100 to $300 for parts and labor.
10. Will fixing OBDII code P0335 improve the performance and fuel efficiency of a 2003 Nissan Sentra?
- Yes, fixing OBDII code P0335 and ensuring the proper functioning of the crankshaft position sensor can help improve the performance and fuel efficiency of the vehicle.
Discuss the causes and fixes for P0335 2003 Nissan Sentra OBDII Code
Code P0335 2003 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
