P0335 2002 Toyota Echo Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2002 Toyota Echo indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2002 Toyota Echo Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2002 Toyota Echo?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2002 Toyota Echo?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2002 Toyota Echo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2002 Toyota Echo code?
Need more information on how to fix the P0335 2002 Toyota Echo code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2002 Toyota Echo code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2002 Toyota Echo Code
1. What are the common symptoms of an OBDII code P0335 on a 2002 Toyota Echo?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 for a 2002 Toyota Echo indicate?
- The code P0335 indicates a problem with the crankshaft position sensor 'A' circuit.
3. What are the possible causes of the OBDII code P0335 on a 2002 Toyota Echo?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, or issues with the sensor's alignment or installation.
4. How can I diagnose the OBDII code P0335 on my 2002 Toyota Echo?
- Diagnosing the code may involve visually inspecting the sensor and its connections, testing the sensor's output voltage, and checking for any damaged wiring.
5. Can I still drive my 2002 Toyota Echo with the OBDII code P0335 present?
- It is not recommended to drive your vehicle with the code P0335 as it can lead to further engine damage and potential safety hazards.
6. How do I repair the OBDII code P0335 on a 2002 Toyota Echo?
- Repairing the code may involve replacing the crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper sensor alignment.
7. Are there any DIY tips for fixing the OBDII code P0335 on a 2002 Toyota Echo?
- While some may attempt DIY repairs, it is recommended to have a professional mechanic diagnose and repair the issue to ensure proper resolution.
8. How much does it typically cost to repair the OBDII code P0335 on a 2002 Toyota Echo?
- The cost of repairing the code can vary depending on the extent of the issue, but it may range from $100 to $300 for parts and labor.
9. Will resetting the OBDII code P0335 on my 2002 Toyota Echo make it go away permanently?
- Resetting the code may temporarily clear the error, but if the underlying issue is not addressed, the code is likely to reappear.
10. How can I prevent the OBDII code P0335 from reoccurring on my 2002 Toyota Echo?
- To prevent the code from reoccurring, it's essential to regularly maintain your vehicle, address any engine performance issues promptly, and ensure proper installation of components.
Discuss the causes and fixes for P0335 2002 Toyota Echo OBDII Code
Code P0335 2002 Toyota Echo comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
