P0335 2002 Nissan Sentra Code - Crankshaft Position Sensor Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2002 Nissan Sentra indicates Crankshaft Position Sensor Circuit.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2002 Nissan Sentra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2002 Nissan Sentra?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2002 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2002 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2002 Nissan Sentra code?
Need more information on how to fix the P0335 2002 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2002 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2002 Nissan Sentra Code
1. What does OBDII code P0335 on a 2002 Nissan Sentra indicate?
The code P0335 on a 2002 Nissan Sentra indicates a problem with the crankshaft position sensor circuit.
2. What are the common symptoms of a P0335 code on a 2002 Nissan Sentra?
Common symptoms of a P0335 code on a 2002 Nissan Sentra include difficulty starting the engine, engine stalling, rough idling, and a decrease in fuel efficiency.
3. What are the possible causes of a P0335 code on a 2002 Nissan Sentra?
Possible causes of a P0335 code on a 2002 Nissan Sentra include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or a problem with the sensor's alignment.
4. How can I diagnose a P0335 code on my 2002 Nissan Sentra?
To diagnose a P0335 code on a 2002 Nissan Sentra, you can use an OBDII scanner to read the code, visually inspect the sensor and its wiring for any visible damage, and perform a continuity test on the sensor circuit.
5. Can I still drive my 2002 Nissan Sentra with a P0335 code?
It is not recommended to drive your 2002 Nissan Sentra with a P0335 code as it can lead to engine performance issues and potential damage if left unaddressed.
6. How much does it cost to repair a P0335 code on a 2002 Nissan Sentra?
The cost to repair a P0335 code on a 2002 Nissan Sentra can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
7. Is it possible to reset the P0335 code on a 2002 Nissan Sentra without fixing the issue?
While you can clear the code using an OBDII scanner, the underlying problem causing the P0335 code will persist until it is properly addressed.
8. Can a DIY enthusiast fix a P0335 code on a 2002 Nissan Sentra?
Depending on your skill level and access to tools, a DIY enthusiast may be able to replace the crankshaft position sensor or repair the wiring themselves to fix a P0335 code on a 2002 Nissan Sentra.
9. How important is the crankshaft position sensor in a 2002 Nissan Sentra?
The crankshaft position sensor is crucial in providing the engine's control module with data on the crankshaft's position and speed, helping to ensure proper engine performance and timing.
10. How long does it typically take to repair a P0335 code on a 2002 Nissan Sentra?
Repairing a P0335 code on a 2002 Nissan Sentra can usually be done within a few hours, depending on the exact cause of the issue and the accessibility of the sensor location.
Discuss the causes and fixes for P0335 2002 Nissan Sentra OBDII Code
Code P0335 2002 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
