P0335 2000 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 2000 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 2000 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 2000 Honda Civic?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 2000 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 2000 Honda Civic code?
Need more information on how to fix the P0335 2000 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 2000 Honda Civic Code
1. What are the common symptoms of OBDII code P0335 on a 2000 Honda Civic?
- Common symptoms include difficulty starting the engine, engine stalling, rough idle, and loss of power while driving.
2. What does the code P0335 on a 2000 Honda Civic indicate?
- OBDII code P0335 indicates a malfunction in the crankshaft position sensor 'A', specifically that there is no signal being received from the sensor.
3. What are the possible causes of OBDII code P0335 on a 2000 Honda Civic?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment or installation.
4. How can I diagnose the cause of OBDII code P0335 on my 2000 Honda Civic?
- To diagnose the issue, you can perform a visual inspection of the sensor and its wiring, test the sensor's voltage and resistance, and check for any related trouble codes in the system.
5. Can I continue driving my 2000 Honda Civic with OBDII code P0335?
- It is not recommended to continue driving the vehicle with this code as it can lead to potential engine performance issues and further damage if left unresolved.
6. How can I repair OBDII code P0335 on my 2000 Honda Civic?
- The most common repair for this code is to replace the crankshaft position sensor 'A' with a new, high-quality sensor that meets the manufacturer's specifications.
7. Is it possible to reset OBDII code P0335 on a 2000 Honda Civic without fixing the issue?
- While you can clear the code using an OBDII scanner, it is important to address the underlying problem causing the code to prevent further issues with the vehicle.
8. Can a DIY enthusiast replace the crankshaft position sensor on a 2000 Honda Civic?
- Yes, replacing the crankshaft position sensor can be a DIY task for those with some mechanical experience and the necessary tools. However, it is recommended to follow a repair manual or tutorial for guidance.
9. How much does it typically cost to repair OBDII code P0335 on a 2000 Honda Civic?
- The cost of repairing this code can vary depending on the labor rates in your area and the cost of the replacement sensor. On average, the total cost can range from $100 to $300.
10. Will fixing OBDII code P0335 improve the overall performance of my 2000 Honda Civic?
- Yes, resolving OBDII code P0335 by fixing the crankshaft position sensor issue can lead to improved engine performance, smoother idling, and better overall drivability of the vehicle.
Discuss the causes and fixes for P0335 2000 Honda Civic OBDII Code
Code P0335 2000 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
