P0335 1999 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 1999 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 1999 Toyota Camry Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 1999 Toyota Camry?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 1999 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 1999 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 1999 Toyota Camry code?
Need more information on how to fix the P0335 1999 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 1999 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 1999 Toyota Camry Code
1. What are common symptoms of OBDII code P0335 in a 1999 Toyota Camry?
- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 indicate in a 1999 Toyota Camry?
- The code P0335 indicates a problem with the Crankshaft Position Sensor 'A' Circuit in the 1999 Toyota Camry.
3. What are some possible causes of OBDII code P0335 in a 1999 Toyota Camry?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the sensor's alignment.
4. How can I diagnose the reason behind OBDII code P0335 in my 1999 Toyota Camry?
- You can diagnose the issue by checking the condition of the crankshaft position sensor, inspecting the wiring and connectors for damage, and performing a scan tool test to monitor sensor readings.
5. Is it safe to continue driving my 1999 Toyota Camry with OBDII code P0335?
- It is not recommended to drive the vehicle with this code as it can lead to potential engine issues and further damage if left unresolved.
6. Can I repair OBDII code P0335 in my 1999 Toyota Camry myself?
- Depending on your mechanical skills, you may be able to replace the crankshaft position sensor yourself. However, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code P0335 in a 1999 Toyota Camry?
- The cost can vary depending on the exact cause of the issue, but typically, replacing the crankshaft position sensor can range from $100 to $300 including parts and labor.
8. Are there any preventive measures to avoid OBDII code P0335 in a 1999 Toyota Camry?
- Regular maintenance, such as checking the condition of the sensors and wiring, can help prevent issues related to the crankshaft position sensor.
9. Can a faulty Crankshaft Position Sensor 'A' Circuit affect the performance of my 1999 Toyota Camry?
- Yes, a faulty sensor can lead to engine misfires, poor acceleration, and other performance issues in the 1999 Toyota Camry.
10. How long does it take to repair OBDII code P0335 in a 1999 Toyota Camry?
- The repair typically takes around 1-2 hours, but the exact duration can vary depending on the complexity of the issue and the mechanic's expertise.
Discuss the causes and fixes for P0335 1999 Toyota Camry OBDII Code
Code P0335 1999 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
