AutoCodes – Honda – P0335 1999 Honda Civic

P0335 1999 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0335 1999 Honda Civic indicates Crankshaft Position Sensor 'A' No Signal.
Common causes
Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,220
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0335 1999 Honda Civic Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
OBDII Code P0335 1999 Honda Civic - Crankshaft Position Sensor 'A' No Signal - AutoCodes.com
P0335 1999 Honda Civic Code - Crankshaft Position Sensor 'A' No Signal

What are the Possible Causes of the DTC P0335 1999 Honda Civic?

  • Faulty crankshaft position sensor
  • Crankshaft position sensor harness is open or shorted
  • Crankshaft position sensor circuit poor electrical connection
  • Signal plate may be damage
  • Starter motor may be faulty
  • Starting system circuit
  • Dead or weak battery

How to Fix the DTC P0335 1999 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0335 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0335 1999 Honda Civic code?

Need more information on how to fix the P0335 1999 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0335 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0335 1999 Honda Civic Code

1. What are the common symptoms of OBDII code P0335 on a 1999 Honda Civic?

The common symptoms of OBDII code P0335 on a 1999 Honda Civic include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What is the most likely cause of OBDII code P0335 on a 1999 Honda Civic?

The most likely cause of OBDII code P0335 on a 1999 Honda Civic is a faulty crankshaft position sensor 'A'. This sensor is responsible for monitoring the position of the crankshaft and sending signals to the engine control module.

3. How can I diagnose a faulty crankshaft position sensor on my 1999 Honda Civic?

To diagnose a faulty crankshaft position sensor on a 1999 Honda Civic, you can use a multimeter to test the sensor's resistance or check for any visible signs of damage or corrosion. Additionally, a diagnostic scan tool can help identify the specific issue.

4. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?

In most cases, a faulty crankshaft position sensor on a 1999 Honda Civic will need to be replaced rather than repaired. It is a crucial component for engine operation, and replacing it ensures proper functioning.

5. Are there any DIY tips for replacing the crankshaft position sensor on a 1999 Honda Civic?

Replacing the crankshaft position sensor on a 1999 Honda Civic is a relatively straightforward process. It typically involves locating the sensor near the crankshaft pulley, disconnecting the electrical connector, removing the sensor, and installing the new one following the manufacturer's instructions.

6. Can driving with OBDII code P0335 on a 1999 Honda Civic cause further damage to the vehicle?

Continuing to drive with OBDII code P0335 on a 1999 Honda Civic can potentially cause further damage to the engine. It is best to address the issue promptly to prevent any long-term consequences.

7. How much does it cost to replace a crankshaft position sensor on a 1999 Honda Civic?

The cost of replacing a crankshaft position sensor on a 1999 Honda Civic can vary depending on the brand of the sensor, labor costs, and location. On average, the parts and labor combined can range from $100 to $300.

8. Are there any other codes that may accompany P0335 on a 1999 Honda Civic?

In some cases, OBDII code P0335 on a 1999 Honda Civic may be accompanied by other related codes, such as P0336 (Crankshaft Position Sensor 'A' Circuit Range/Performance) or P0337 (Crankshaft Position Sensor 'A' Circuit Low Input).

9. Will resetting the OBDII code P0335 on a 1999 Honda Civic make it go away permanently?

Resetting the OBDII code P0335 on a 1999 Honda Civic may temporarily clear the code, but if the underlying issue with the crankshaft position sensor 'A' is not resolved, the code is likely to reappear. It is crucial to diagnose and fix the root cause to prevent the code from coming back.

10. Can a bad battery or alternator cause OBDII code P0335 on a 1999 Honda Civic?

While a bad battery or alternator can potentially cause electrical issues in a vehicle, OBDII code P0335 on a 1999 Honda Civic is specifically related to a fault with the crankshaft position sensor 'A'. It is recommended to focus on diagnosing and repairing the sensor before exploring other potential causes.

Discuss the causes and fixes for P0335 1999 Honda Civic OBDII Code

Code P0335 1999 Honda Civic comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play