P0335 1998 Toyota Camry Code - Crankshaft Position Sensor 'A' Circuit
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0335 1998 Toyota Camry indicates Crankshaft Position Sensor 'A' Circuit .
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0335 1998 Toyota Camry Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0335 1998 Toyota Camry?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0335 1998 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0335 1998 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0335 1998 Toyota Camry code?
Need more information on how to fix the P0335 1998 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0335 1998 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0335 1998 Toyota Camry Code
1. What are the common symptoms of OBDII code P0335 in a 1998 Toyota Camry?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What does the OBDII code P0335 indicate in a 1998 Toyota Camry?
- OBDII code P0335 indicates a problem with the crankshaft position sensor 'A' circuit in a 1998 Toyota Camry.
3. What are the potential causes of OBDII code P0335 in a 1998 Toyota Camry?
- Potential causes include a faulty crankshaft position sensor, damaged sensor wiring, sensor connection issues, or a problem with the sensor circuit.
4. How can I diagnose the issue causing OBDII code P0335 in my 1998 Toyota Camry?
- Diagnose the issue by checking the crankshaft position sensor for proper operation, inspecting the sensor wiring for damage, and ensuring the sensor connections are secure.
5. Can I drive my 1998 Toyota Camry with OBDII code P0335?
- It is not recommended to drive the vehicle with OBDII code P0335 as it can lead to further engine problems and potentially cause the vehicle to stall unexpectedly.
6. How can I repair OBDII code P0335 in my 1998 Toyota Camry?
- Repair the issue by replacing the faulty crankshaft position sensor, repairing any damaged wiring, and ensuring all connections are secure and properly connected.
7. Are there any DIY tips for fixing OBDII code P0335 in a 1998 Toyota Camry?
- DIY tips include carefully inspecting the sensor and wiring for visible damage, using a multimeter to test sensor functionality, and referring to the vehicle's service manual for guidance.
8. How much does it cost to repair OBDII code P0335 in a 1998 Toyota Camry?
- The cost of repairing OBDII code P0335 can vary depending on the cause of the issue, with potential costs ranging from $100 to $300 for parts and labor.
9. Can a faulty crankshaft position sensor cause other issues besides triggering OBDII code P0335 in a 1998 Toyota Camry?
- Yes, a faulty crankshaft position sensor can cause other issues such as misfires, poor acceleration, and problems with the vehicle's transmission.
10. How often should the crankshaft position sensor be replaced in a 1998 Toyota Camry to prevent OBDII code P0335 from recurring?
- The crankshaft position sensor should be replaced as recommended by the vehicle manufacturer or if any issues arise, to prevent the recurrence of OBDII code P0335.
Discuss the causes and fixes for P0335 1998 Toyota Camry OBDII Code
Code P0335 1998 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
