AutoCodes - Toyota - P0332 2011 TOYOTA CAMRY

P0332 2011 TOYOTA CAMRY Code - Knock Sensor 2 Circuit Low Input Bank 2

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0332 2011 TOYOTA CAMRY code possible causes

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

|How do I fix the P0332 2011 TOYOTA CAMRY code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0332 2011 TOYOTA CAMRY code tech notes

The P0332 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem if you have other codes try to fix those first.

|Cost of diagnosing the P0332 2011 TOYOTA CAMRY code

Labor: 1.0

The cost of diagnosing the P0332 2011 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0332 2011 TOYOTA CAMRY code detected?

An excessively low voltage from the sensor is sent to Engine Control Module (ECM)

|What are P0332 2011 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible Lack/Loss of Power

|P0332 2011 TOYOTA CAMRY code description

Flat type knock sensors (non-resonant type) have structures that can detect vibrations over a wide band of frequencies: between approximately 6 kHz and 15 kHz.
A knock sensor is fitted onto the engine block to detect engine knocking. The knock sensor contains a piezoelectric element which generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.
OBDII Code P0332 2011 Toyota Camry - Knock Sensor 2 Circuit Low Input Bank 2 - AutoCodes.com

|Need more information with the P0332 2011 TOYOTA CAMRY code?

Need more information on how to fix the P0332 2011 TOYOTA CAMRY code? Get Access to Factory Service Manuals

|Need help with a P0332 2011 TOYOTA CAMRY code?

Get the P0332 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

|P0332 2011 TOYOTA CAMRY code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0332 2011 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?