AutoCodes – Ford – P0331 Ford

P0331 Ford Code - Knock Sensor 2 Circuit Range/Performance Bank 2

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty Knock Sensor 2 Bank 2, Knock Sensor 2 Bank 2 circuit poor electrical connection, Knock Sensor 2 Bank 2 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0331 Ford indicates Knock Sensor 2 Circuit Range/Performance Bank 2.
Common causes: Common causes include Faulty Knock Sensor 2 Bank 2, Knock Sensor 2 Bank 2 circuit poor electrical connection, Knock Sensor 2 Bank 2 harness is open or shorted.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,144

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0331 Ford Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0331 Ford - Knock Sensor 2 Circuit Range/Performance Bank 2 - AutoCodes.com — P0331 Ford Code - Knock Sensor 2 Circuit Range/Performance Bank 2

What does this mean?

What are the Possible Causes of the DTC P0331 Ford?

Faulty Knock Sensor 2 Bank 2
Knock Sensor 2 Bank 2 circuit poor electrical connection
Knock Sensor 2 Bank 2 harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0331 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0331 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0331 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0331 Ford code?

Need more information on how to fix the P0331 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0331 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.