P0330 2017 GMC Sierra Code - Knock Sensor Circuit Bank 2
Quick Answer
The Knock Sensor system enables the Engine Control Module (ECM) to control the ignition timing for the best possible performance while protecting the engine from potentially damaging levels of detonation, also known as spark knock. Common causes include Faulty Knock Sensor Bank 2, Knock Sensor Bank 2 circuit poor electrical connection, Knock Sensor Bank 2 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0330 2017 GMC Sierra indicates Knock Sensor Circuit Bank 2.
- Common causes
- Common causes include Faulty Knock Sensor Bank 2, Knock Sensor Bank 2 circuit poor electrical connection, Knock Sensor Bank 2 harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0330 2017 GMC Sierra Description
The control module learns a minimum noise level, or background noise, at idle from the knock sensor and uses calibrated values for the rest of the RPM range. The control module uses the minimum noise level to calculate a noise channel. A normal knock sensor signal will ride within the noise channel. As engine speed and load change, the noise channel upper and lower parameters will change to accommodate the normal knock sensor signal, keeping the signal within the channel. In order to determine which cylinders are knocking, the control module only uses knock sensor signal information when each cylinder is near the Top Dead Center (TDC) of the firing stroke. If a knock is present, the signal will range outside of the noise channel.
If the control module has determined that a knock is present, it will retard the ignition timing to attempt to eliminate the knock. The control module will always try to work back to a zero-compensation level, or no spark retard. An abnormal knock sensor signal will stay outside of the noise channel or will not be present. knock sensor diagnostics are calibrated to detect faults with the knock sensor circuitry inside the control module, the knock sensor wiring, or the knock sensor voltage output. Some diagnostics are also calibrated to detect constant noise from an outside influence such as a loose/damaged component or excessive engine mechanical noise.
The Diagnostic Trouble Code (DTC) will be set when the signal circuit from the Knock Sensor Bank 1 is open for greater than 5s.
What are the Possible Causes of the DTC P0330 2017 GMC Sierra?
- Faulty Knock Sensor Bank 2
- Knock Sensor Bank 2 circuit poor electrical connection
- Knock Sensor Bank 2 harness is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0330 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0330 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0330 2017 GMC Sierra code?
Need more information on how to fix the P0330 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0330 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0330 2017 GMC Sierra Code
What does the OBDII code P0330 mean on a 2017 GMC Sierra?
P0330 indicates a fault in the Knock Sensor Circuit for Bank 2, which monitors engine vibrations caused by knock or detonation.
What are the common symptoms of P0330 on a 2017 GMC Sierra?
Symptoms may include reduced engine performance, poor fuel economy, illuminated check engine light, or engine knocking noises.
What causes the P0330 code on a 2017 GMC Sierra?
Common causes include a faulty knock sensor, damaged wiring or connectors, a defective PCM, or engine issues such as excessive carbon buildup or detonation.
Can I drive my 2017 GMC Sierra with the P0330 code?
While the vehicle may still be drivable, it’s not advisable. Prolonged driving with this code can lead to engine damage due to unresolved knocking or detonation.
How do you diagnose the P0330 code?
Diagnosis typically involves using a scan tool to confirm the code, inspecting the knock sensor and its wiring for damage, and testing the sensor’s resistance and signal.
How much does it cost to fix the P0330 code on a 2017 GMC Sierra?
Repair costs vary, but replacing a knock sensor typically ranges between $150 and $500, including parts and labor.
Where is the knock sensor for Bank 2 located on a 2017 GMC Sierra?
The knock sensor for Bank 2 is typically located on the engine block, cylinder head, or intake manifold, on the side corresponding to cylinders 2, 4, 6, and 8.
Can a bad knock sensor cause long-term damage to my engine?
Yes, if the knock sensor fails to detect detonation, it can lead to severe engine damage over time, including piston or cylinder wall damage.
What tools are needed to fix a P0330 code?
Common tools include a scan tool, multimeter, basic hand tools, and possibly a torque wrench for proper sensor installation.
Does the P0330 code mean the knock sensor is bad?
Not necessarily. It could also indicate wiring issues, a poor connection, or engine-related problems causing the sensor to trigger.
Discuss the causes and fixes for P0330 2017 GMC Sierra OBDII Code
Code P0330 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
