AutoCodes – Ford – P0330 1999 Ford F150

P0330 1999 Ford F150 Code - Knock Sensor 2 Circuit Malfunction Bank 2

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty Knock Sensor 2 Bank 2, Knock Sensor 2 Bank 2 circuit poor electrical connection, Knock Sensor 2 Bank 2 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0330 1999 Ford F150 indicates Knock Sensor 2 Circuit Malfunction Bank 2 .
Common causes: Common causes include Faulty Knock Sensor 2 Bank 2, Knock Sensor 2 Bank 2 circuit poor electrical connection, Knock Sensor 2 Bank 2 harness is open or shorted.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,339

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0330 1999 Ford F150 Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0330 1999 Ford F150 - Knock Sensor 2 Circuit Malfunction Bank 2 - AutoCodes.com — P0330 1999 Ford F150 Code - Knock Sensor 2 Circuit Malfunction Bank 2

What does this mean?

What are the Possible Causes of the DTC P0330 1999 Ford F150?

Faulty Knock Sensor 2 Bank 2
Knock Sensor 2 Bank 2 circuit poor electrical connection
Knock Sensor 2 Bank 2 harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0330 1999 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0330 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.
The knock sensor detects vibration upon increase and decrease in engine rpm. The knock sensor generates a voltage based on this vibration. Should this voltage go outside a calibrated level a DTC will set.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0330 1999 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0330 1999 Ford F150 code?

Need more information on how to fix the P0330 1999 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0330 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0330 1999 Ford F150 Code

1. What are common symptoms of OBDII code P0330 on a 1999 Ford F150?

- Common symptoms include engine knocking or pinging noises, a decrease in fuel efficiency, and potential engine misfires.

2. What does the OBDII code P0330 indicate on a 1999 Ford F150?

- The code P0330 specifically refers to a Knock Sensor 2 Circuit Malfunction Bank 2 in the engine of the 1999 Ford F150.

3. What are possible causes of the Knock Sensor 2 Circuit Malfunction Bank 2 error code?

- Possible causes include a faulty knock sensor, wiring issues in the knock sensor circuit, or problems with the engine control module (ECM).

4. How can I diagnose the cause of the Knock Sensor 2 Circuit Malfunction Bank 2 error code?

- Diagnosing the issue may involve testing the knock sensor, inspecting the wiring for damage, and checking the ECM for any malfunctions.

5. Is it safe to continue driving my 1999 Ford F150 with the P0330 code?

- It is not recommended to continue driving with the P0330 code as it can lead to potential engine damage if left unresolved.

6. Can I repair the Knock Sensor 2 Circuit Malfunction Bank 2 issue on my own?

- While some DIY enthusiasts may attempt to address the issue, it is recommended to consult with a professional mechanic for proper diagnosis and repair.

7. How much does it typically cost to fix the P0330 error on a 1999 Ford F150?

- The cost of fixing the P0330 error can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor.

8. Are there any temporary solutions to address the Knock Sensor 2 Circuit Malfunction Bank 2 code?

- Resetting the error code using an OBDII scanner may temporarily clear the code, but it is crucial to address the root cause for a permanent fix.

9. Will the P0330 code cause my 1999 Ford F150 to fail an emissions test?

- Yes, the P0330 code can cause your vehicle to fail an emissions test due to the impact on engine performance and emissions control systems.

10. How can I prevent the Knock Sensor 2 Circuit Malfunction Bank 2 error from occurring in the future?

- Regular maintenance, such as checking and replacing faulty sensors, inspecting wiring for damage, and keeping the engine well-tuned, can help prevent the recurrence of the P0330 error.