AutoCodes – Scion – P0328 Scion

P0328 Scion Code - Knock Sensor 1 Circuit High Input

Quick Answer

A flat-type knock control sensor (non-resonant type) has a structure that can detect vibrations between approximately 5 kHz and 15 kHz. Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0328 Scion indicates Knock Sensor 1 Circuit High Input.
Common causes: Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,416

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 Scion Description

A flat-type knock control sensor (non-resonant type) has a structure that can detect vibrations between approximately 5 kHz and 15 kHz. The knock control sensor is fitted onto the engine block to detect engine knocking. The knock control sensor contains a piezoelectric element that generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.
If the output voltage transmitted by the knock control sensor remains low or high for 1 second or more, the Engine Control Module (ECM) interprets this as a malfunction in the sensor circuit and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0328 Scion - Knock Sensor 1 Circuit High Input - AutoCodes.com — P0328 Scion Code - Knock Sensor 1 Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0328 Scion?

Faulty Knock Sensor
Knock Sensor circuit poor electrical connection
Knock Sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 Scion code?

Need more information on how to fix the P0328 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 Scion code diagnosed by a professional: Find a repair shop in your area

Information for Specific Scion Models

P0328 2005 Scion xB — Knock Sensor 1 Circuit High Input
P0328 2006 Scion xB — Knock Sensor 1 Circuit High Input
P0328 2007 Scion xB — Knock Sensor 1 Circuit High Input

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.