P0328 2019 Honda CR-V Code - Knock Sensor Circuit High Voltage
Quick Answer
The knock sensor is mounted on the engine block and detects engine knocking. Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0328 2019 Honda CR-V indicates Knock Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0328 2019 Honda CR-V Description
What are the Possible Causes of the DTC P0328 2019 Honda CR-V?
- Faulty Knock Sensor
- Knock Sensor harness is open or shorted
- Knock Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0328 2019 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0328 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0328 2019 Honda CR-V code?
Need more information on how to fix the P0328 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0328 2019 Honda CR-V Code
1. What does the OBDII code P0328 mean on a 2019 Honda CR-V?
P0328 indicates a "Knock Sensor Circuit High Voltage" issue, which means the engine's knock sensor is detecting unusually high voltage signals, potentially caused by a malfunction.
2. What are the symptoms of a P0328 code in a 2019 Honda CR-V?
Symptoms may include a check engine light, decreased fuel efficiency, reduced engine performance, and potential knocking or pinging sounds during acceleration.
3. What causes the P0328 code on a 2019 Honda CR-V?
Common causes include a faulty knock sensor, damaged or corroded wiring, poor electrical connections, or an issue with the engine's control module (ECM).
4. Can I drive my 2019 Honda CR-V with a P0328 code?
While the car may still be drivable, it’s not recommended for extended periods as the engine's performance and fuel economy may be impacted, and potential engine damage could occur if knocking is not managed.
5. How do I fix the P0328 code on a 2019 Honda CR-V?
Repairs may include replacing the knock sensor, repairing damaged wiring, cleaning corroded connections, or reprogramming/updating the ECM if necessary.
6. Where is the knock sensor located on a 2019 Honda CR-V?
The knock sensor is typically located on the engine block, cylinder head, or intake manifold, depending on the engine configuration.
7. How much does it cost to repair a P0328 code on a 2019 Honda CR-V?
Repair costs can range from $100 to $400, depending on whether the knock sensor needs replacement or if additional repairs like wiring fixes are needed.
8. Can a bad knock sensor cause engine damage on a 2019 Honda CR-V?
Yes, if left unresolved, a faulty knock sensor may fail to detect engine knock, potentially leading to pre-ignition or detonation, which can damage the engine.
9. Will resetting the check engine light fix the P0328 code on a 2019 Honda CR-V?
Resetting the light may clear the code temporarily, but it won’t fix the underlying problem. The code will likely return if the issue is not addressed.
10. How can I prevent the P0328 code from occurring on my 2019 Honda CR-V?
Regular maintenance, such as inspecting and cleaning electrical connections, using high-quality fuel, and promptly addressing any engine performance issues, can help prevent this code.
Discuss the causes and fixes for P0328 2019 Honda CR-V OBDII Code
Code P0328 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
