AutoCodes – Nissan – P0328 2012 Nissan Rogue

P0328 2012 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0328 2012 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,710

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 2012 Nissan Rogue Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0328 2012 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com — P0328 2012 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

What does this mean?

What are the Possible Causes of the DTC P0328 2012 Nissan Rogue?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2012 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2012 Nissan Rogue code?

Need more information on how to fix the P0328 2012 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2012 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2012 Nissan Rogue?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential engine knocking noises.

2. What does the OBDII code P0328 on a 2012 Nissan Rogue indicate?

- The code P0328 indicates a Knock Sensor Circuit High Input condition in Bank 1 of the engine.

3. What are the possible causes of the Knock Sensor Circuit High Input code in a 2012 Nissan Rogue?

- Possible causes include a faulty knock sensor, wiring issues in the knock sensor circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the OBDII code P0328 in my 2012 Nissan Rogue?

- Diagnosing this code typically involves testing the knock sensor, checking the wiring for damage, and inspecting the ECM for any faults.

5. Can driving with the P0328 code on a 2012 Nissan Rogue cause further damage?

- Driving with a faulty knock sensor can potentially cause engine damage over time if not addressed promptly.

6. Is it safe to continue driving my 2012 Nissan Rogue with the Knock Sensor Circuit High Input code?

- It is not recommended to drive the vehicle with this code as it can lead to decreased performance and potential engine issues.

7. How can I reset the OBDII code P0328 in my 2012 Nissan Rogue?

- The code can be reset using an OBDII scanner or by disconnecting the car's battery for a few minutes.

8. What are some repair tips for fixing the Knock Sensor Circuit High Input code in a 2012 Nissan Rogue?

- Repair tips may include replacing the knock sensor, repairing damaged wiring, or reprogramming the ECM if necessary.

9. Can a DIY enthusiast fix the P0328 code on a 2012 Nissan Rogue?

- Depending on the skill level, a DIY enthusiast may be able to address this issue by following repair guides and utilizing the necessary tools.

10. How much does it typically cost to repair the Knock Sensor Circuit High Input code in a 2012 Nissan Rogue?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $200 to $500 or more.