AutoCodes – Nissan – P0328 2011 Nissan Rogue

P0328 2011 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0328 2011 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,658

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0328 2011 Nissan Rogue Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0328 2011 Nissan Rogue - Knock Sensor Circuit High Input- Bank 1 - AutoCodes.com — P0328 2011 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1

What does this mean?

What are the Possible Causes of the DTC P0328 2011 Nissan Rogue?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0328 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0328 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0328 2011 Nissan Rogue code?

Need more information on how to fix the P0328 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0328 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0328 2011 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0328 in a 2011 Nissan Rogue?

- Common symptoms include engine knocking or pinging noises, reduced engine performance, and the illumination of the Check Engine Light.

2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" mean for a 2011 Nissan Rogue?

- This code indicates that the knock sensor in Bank 1 is detecting a higher than normal voltage input, potentially due to a fault in the sensor or its circuit.

3. What are the possible causes of OBDII code P0328 in a 2011 Nissan Rogue?

- The code may be triggered by a faulty knock sensor, wiring issues in the knock sensor circuit, engine misfires, or problems with the engine control module.

4. How can I diagnose the cause of OBDII code P0328 in my 2011 Nissan Rogue?

- Diagnosing this code typically involves checking the knock sensor and its wiring for any damage, testing the sensor's resistance, and inspecting for any engine misfires that may be affecting sensor readings.

5. Can I drive my 2011 Nissan Rogue with OBDII code P0328?

- It is not recommended to drive with this code present, as it can lead to engine performance issues and potential long-term damage if left unresolved.

6. What are the repair options for fixing OBDII code P0328 in a 2011 Nissan Rogue?

- Repair options may include replacing the knock sensor, repairing damaged wiring, addressing any engine misfires, or reprogramming the engine control module.

7. How much does it typically cost to repair OBDII code P0328 in a 2011 Nissan Rogue?

- Repair costs can vary depending on the extent of the issue and the labor rates in your area, but expect to pay anywhere from $200 to $500 for parts and labor.

8. Are there any DIY tips for addressing OBDII code P0328 in a 2011 Nissan Rogue?

- While some may attempt to replace the knock sensor themselves, diagnosis and repair of this code are best left to experienced mechanics due to the complexity of the system.

9. Will resetting the Check Engine Light clear OBDII code P0328 in a 2011 Nissan Rogue?

- Resetting the light may temporarily turn it off, but if the underlying issue causing the code is not fixed, the light will likely reappear once the vehicle is driven and the fault is detected again.

10. How can I prevent OBDII code P0328 from recurring in my 2011 Nissan Rogue?

- Regular maintenance, including timely spark plug replacements and addressing any engine performance issues promptly, can help prevent the reoccurrence of this code.