P0328 2010 Nissan Rogue Code - Knock Sensor Circuit High Input- Bank 1
Quick Answer
The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0328 2010 Nissan Rogue indicates Knock Sensor Circuit High Input- Bank 1.
- Common causes
- Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0328 2010 Nissan Rogue Description
What are the Possible Causes of the DTC P0328 2010 Nissan Rogue?
- Faulty knock sensor
- Knock sensor circuit poor electrical connection
- Knock sensor harness is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0328 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0328 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0328 2010 Nissan Rogue code?
Need more information on how to fix the P0328 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0328 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0328 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0328 in a 2010 Nissan Rogue?
- Common symptoms include engine knocking or pinging noises, decreased fuel efficiency, and potential loss of power.
2. What does the OBDII code P0328 "Knock Sensor Circuit High Input- Bank 1" indicate in a 2010 Nissan Rogue?
- This code indicates that the knock sensor in Bank 1 is detecting a higher-than-normal input voltage, which can lead to engine performance issues.
3. What are the possible causes of OBDII code P0328 in a 2010 Nissan Rogue?
- Possible causes include a faulty knock sensor, wiring issues in the knock sensor circuit, engine mechanical problems causing knock sensor activation, or a faulty Engine Control Module (ECM).
4. How can I diagnose the cause of OBDII code P0328 in my 2010 Nissan Rogue?
- Diagnosis involves checking the knock sensor and its wiring for damage, inspecting the engine for mechanical issues causing knocking, and testing the ECM for proper functioning.
5. Can I continue driving my 2010 Nissan Rogue with OBDII code P0328 present?
- It's not recommended to drive with this code present, as it can lead to engine damage and decreased performance over time.
6. How is OBDII code P0328 in a 2010 Nissan Rogue typically repaired?
- Repair usually involves replacing the faulty knock sensor, repairing any damaged wiring, addressing any engine mechanical issues, and resetting the ECM.
7. Are there any DIY tips for fixing OBDII code P0328 in a 2010 Nissan Rogue?
- DIY tips include checking and cleaning the knock sensor connections, inspecting wiring for wear or damage, and ensuring the engine is in good condition to prevent knocking.
8. How much does it cost to repair OBDII code P0328 in a 2010 Nissan Rogue?
- The cost of repair can vary depending on the cause of the issue, but it typically ranges from $200 to $500 for parts and labor.
9. Can OBDII code P0328 in a 2010 Nissan Rogue cause long-term damage if left untreated?
- Yes, leaving this code untreated can lead to engine damage, reduced fuel efficiency, and potential safety hazards due to decreased performance.
10. After repairing OBDII code P0328 in a 2010 Nissan Rogue, how can I ensure it doesn't come back?
- Regular maintenance, avoiding harsh driving conditions, and addressing any engine issues promptly can help prevent the recurrence of this code.
Discuss the causes and fixes for P0328 2010 Nissan Rogue OBDII Code
Code P0328 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
