AutoCodes – Nissan – P0327 2011 Nissan Rogue

P0327 2011 Nissan Rogue Code - Knock Sensor Circuit Low Input Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0327 2011 Nissan Rogue indicates Knock Sensor Circuit Low Input Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,918

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2011 Nissan Rogue Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0327 2011 Nissan Rogue - Knock Sensor Circuit Low Input Bank 1 - AutoCodes.com — P0327 2011 Nissan Rogue Code - Knock Sensor Circuit Low Input Bank 1

What does this mean?

What are the Possible Causes of the DTC P0327 2011 Nissan Rogue?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0327 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2011 Nissan Rogue code?

Need more information on how to fix the P0327 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2011 Nissan Rogue Code

1. What does OBDII code P0327 on my 2011 Nissan Rogue mean?

- The code P0327 indicates a low input in the knock sensor circuit for Bank 1 in your vehicle.

2. What are some common symptoms of a P0327 code in a Nissan Rogue?

- Common symptoms may include reduced engine performance, poor fuel efficiency, and possibly even engine knocking noises.

3. What are the potential causes of a Knock Sensor Circuit Low Input Bank 1 code in a Nissan Rogue?

- Causes may include a faulty knock sensor, damaged wiring in the knock sensor circuit, or a problem with the engine control module (ECM).

4. How serious is a P0327 code on a 2011 Nissan Rogue?

- While it may not cause immediate harm to your vehicle, ignoring the P0327 code can lead to long-term engine damage and decreased performance.

5. Can I continue to drive my Nissan Rogue with a P0327 code?

- It's best to address the issue as soon as possible to prevent potential damage to the engine. It is generally not recommended to drive the vehicle extensively with this code.

6. How can I diagnose a P0327 code in my Nissan Rogue?

- A proper diagnosis involves using a scan tool to read the code, checking the knock sensor and its wiring for any visible damage, and testing the sensor's resistance.

7. What are some repair tips for fixing a Knock Sensor Circuit Low Input Bank 1 code in a Nissan Rogue?

- Repair may involve replacing the knock sensor, repairing or replacing damaged wiring, or reprogramming the engine control module.

8. Can I fix a P0327 code in my Nissan Rogue myself, or do I need a professional mechanic?

- Depending on your level of expertise, you may be able to address the issue yourself by replacing the knock sensor or repairing damaged wiring. However, it's recommended to consult a professional if you're unsure.

9. How much does it typically cost to repair a P0327 code in a 2011 Nissan Rogue?

- The cost of repair can vary based on the specific issue causing the code. Replacing a knock sensor can range from $150 to $300, while repairing wiring or addressing ECM issues may increase the cost.

10. Is there a way to prevent a P0327 code from occurring in the future in my Nissan Rogue?

- Regular maintenance, such as checking the knock sensor and its wiring during tune-ups, can help prevent issues that lead to a P0327 code. It's also essential to address any engine performance problems promptly.