AutoCodes – Toyota – P0327 2009 Toyota Camry

P0327 2009 Toyota Camry Code - Knock Sensor 1 Circuit Low Input Bank 1

Quick Answer

Flat type knock sensors (non-resonant type) have structures that can detect vibrations over a wide band of frequencies: between approximately 6 kHz and 15 kHz. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0327 2009 Toyota Camry indicates Knock Sensor 1 Circuit Low Input Bank 1 .
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,843

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2009 Toyota Camry Description

Flat type knock sensors (non-resonant type) have structures that can detect vibrations over a wide band of frequencies: between approximately 6 kHz and 15 kHz.
A knock sensor is fitted onto the engine block to detect engine knocking. The knock sensor contains a piezoelectric element which generates a voltage when it becomes deformed. The voltage is generated when the engine block vibrates due to knocking. Any occurrence of engine knocking can be suppressed by delaying the ignition timing.

OBDII Code P0327 2009 Toyota Camry - Knock Sensor 1 Circuit Low Input Bank 1 - AutoCodes.com — P0327 2009 Toyota Camry Code - Knock Sensor 1 Circuit Low Input Bank 1

What does this mean?

What are the Possible Causes of the DTC P0327 2009 Toyota Camry?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2009 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0327 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem if you have other codes try to fix those first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2009 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2009 Toyota Camry code?

Need more information on how to fix the P0327 2009 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2009 Toyota Camry Code

What does OBDII code P0327 mean on a 2009 Toyota Camry?

P0327 indicates that the knock sensor on Bank 1 is detecting a signal that is lower than the expected range, typically caused by a malfunction in the knock sensor circuit.

What are the common symptoms of code P0327?

Symptoms may include poor engine performance, reduced fuel efficiency, audible engine knocking, and the Check Engine Light being illuminated.

What causes code P0327 on a 2009 Toyota Camry?

Common causes include a faulty knock sensor, damaged or corroded wiring, loose connections, or a malfunctioning Engine Control Module (ECM).

Can I drive my 2009 Toyota Camry with a P0327 code?

While the car may still drive, it is not recommended to ignore the issue, as prolonged driving with this code can lead to engine damage due to uncontrolled knocking.

How can I diagnose a P0327 code?

Start by checking the knock sensor wiring and connections for damage or corrosion. If the wiring is intact, test the knock sensor with a multimeter to ensure itâ€™s functioning correctly.

How do I fix code P0327 on a 2009 Toyota Camry?

Repairs may include replacing the faulty knock sensor, repairing or replacing damaged wiring or connectors, or reprogramming/replacing the ECM if necessary.

How much does it cost to fix a P0327 code?

Replacing a knock sensor typically costs $150-$400, including parts and labor. Wiring repairs may cost less, while ECM replacement can be more expensive.

Can a dirty engine cause a P0327 code?

Yes, excessive carbon buildup in the engine can cause knocking and trigger the knock sensor to report abnormal signals, potentially leading to this code.

Does the P0327 code always mean the knock sensor is bad?

No, the issue could also be related to wiring, connectors, or the ECM, so thorough diagnosis is essential before replacing the sensor.

What tools do I need to fix a P0327 code?

You may need a multimeter to test the knock sensor, a diagnostic scanner to clear the code, and basic hand tools to replace the sensor or repair wiring.