AutoCodes – Nissan – P0327 2008 Nissan Rogue

P0327 2008 Nissan Rogue Code - Knock Sensor Circuit Low Input Bank 1

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0327 2008 Nissan Rogue indicates Knock Sensor Circuit Low Input Bank 1.
Common causes: Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,132

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0327 2008 Nissan Rogue Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).

OBDII Code P0327 2008 Nissan Rogue - Knock Sensor Circuit Low Input Bank 1 - AutoCodes.com — P0327 2008 Nissan Rogue Code - Knock Sensor Circuit Low Input Bank 1

What does this mean?

What are the Possible Causes of the DTC P0327 2008 Nissan Rogue?

Faulty knock sensor
Knock sensor circuit poor electrical connection
Knock sensor harness is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0327 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2008 Nissan Rogue code?

Need more information on how to fix the P0327 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2008 Nissan Rogue Code

1. What is OBDII code P0327 on a 2008 Nissan Rogue?

The OBDII code P0327 on a 2008 Nissan Rogue indicates a Knock Sensor Circuit Low Input Bank 1 error.

2. What are the common symptoms of a P0327 code in a 2008 Nissan Rogue?

Common symptoms of a P0327 code in a 2008 Nissan Rogue may include engine knocking or pinging noises, poor acceleration, and reduced fuel efficiency.

3. What can cause the P0327 code to trigger in a 2008 Nissan Rogue?

The P0327 code in a 2008 Nissan Rogue is often triggered by a faulty knock sensor, damaged wiring or connectors related to the knock sensor, or engine timing issues.

4. How can I diagnose the P0327 code in my 2008 Nissan Rogue?

Diagnosing the P0327 code in a 2008 Nissan Rogue involves checking the knock sensor and its wiring for damage, testing the sensor's resistance, and verifying proper engine timing.

5. Can I continue driving my 2008 Nissan Rogue with a P0327 code?

It is not recommended to continue driving your 2008 Nissan Rogue with a P0327 code, as it can lead to potential engine damage and decreased performance over time.

6. How can I repair the P0327 code in my 2008 Nissan Rogue?

To repair the P0327 code in a 2008 Nissan Rogue, you may need to replace the knock sensor, repair any damaged wiring or connectors, and ensure proper engine timing.

7. Will resetting the OBDII system clear the P0327 code in my 2008 Nissan Rogue?

Resetting the OBDII system may temporarily clear the P0327 code in your 2008 Nissan Rogue, but if the underlying issue is not fixed, the code is likely to reappear.

8. How much does it typically cost to repair a P0327 code in a 2008 Nissan Rogue?

The cost of repairing a P0327 code in a 2008 Nissan Rogue can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor.

9. Can a P0327 code in a 2008 Nissan Rogue affect the vehicle's emissions?

Yes, a P0327 code in a 2008 Nissan Rogue can potentially affect the vehicle's emissions, leading to increased pollution and potentially causing the vehicle to fail emissions tests.

10. Is it possible to prevent the recurrence of a P0327 code in a 2008 Nissan Rogue?

Regular maintenance, such as checking and replacing the knock sensor as needed, ensuring proper engine timing, and addressing any wiring issues promptly, can help prevent the recurrence of a P0327 code in a 2008 Nissan Rogue.