AutoCodes – Toyota – P0327 2001 Toyota Highlander

P0327 2001 Toyota Highlander Code - Knock Sensor 1 Circuit Low Input

Quick Answer

The knock sensor is attached to the cylinder block. Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0327 2001 Toyota Highlander indicates Knock Sensor 1 Circuit Low Input.
Common causes
Common causes include Faulty Knock Sensor, Knock Sensor circuit poor electrical connection, Knock Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,699
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 16, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0327 2001 Toyota Highlander Description

The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).
OBDII Code P0327 2001 Toyota Highlander - Knock Sensor 1 Circuit Low Input - AutoCodes.com
P0327 2001 Toyota Highlander Code - Knock Sensor 1 Circuit Low Input

What are the Possible Causes of the DTC P0327 2001 Toyota Highlander?

  • Faulty Knock Sensor
  • Knock Sensor circuit poor electrical connection
  • Knock Sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0327 2001 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0327 2001 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0327 2001 Toyota Highlander code?

Need more information on how to fix the P0327 2001 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0327 2001 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0327 2001 Toyota Highlander Code

1. What are the common symptoms of OBDII code P0327 on a 2001 Toyota Highlander?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential engine misfires.

2. What does the OBDII code P0327 indicating "Knock Sensor 1 Circuit Low Input" mean for a 2001 Toyota Highlander?

- This code indicates that the knock sensor in bank 1 is detecting a lower than normal voltage input, signaling a potential issue with engine timing or knocking.

3. What are the possible causes of the P0327 code on a 2001 Toyota Highlander?

- The code can be triggered by a faulty knock sensor, damaged wiring or connectors related to the knock sensor circuit, or engine mechanical issues causing abnormal vibrations.

4. How can I diagnose the root cause of the P0327 code on my 2001 Toyota Highlander?

- You can start by inspecting the knock sensor wiring and connectors for any visible damage, testing the knock sensor for proper functionality, and checking for any signs of engine knocking or pinging.

5. Can driving with the P0327 code on a 2001 Toyota Highlander cause further damage?

- Continuing to drive with this code may lead to potential engine damage due to improper engine timing and knock detection, so it is best to address the issue promptly.

6. Are there any DIY repair tips for addressing the P0327 code on a 2001 Toyota Highlander?

- DIY enthusiasts can attempt to replace the knock sensor themselves after identifying its location in the engine bay and following proper safety precautions.

7. How much does it typically cost to repair the P0327 code on a 2001 Toyota Highlander at a mechanic or dealership?

- The cost of repairing this code can vary depending on the labor rates and parts prices, but it is advisable to budget around $150 to $300 for the knock sensor replacement.

8. Can resetting the OBDII system clear the P0327 code temporarily on a 2001 Toyota Highlander?

- Resetting the system may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear after driving for a certain period.

9. Will the P0327 code on a 2001 Toyota Highlander cause the vehicle to fail emissions testing?

- Yes, the P0327 code can cause the vehicle to fail emissions testing due to its impact on engine performance and emissions control systems.

10. Is it safe to ignore the P0327 code on a 2001 Toyota Highlander if the vehicle seems to be running fine otherwise?

- While the vehicle may seem fine initially, ignoring the P0327 code can lead to potential long-term engine damage and decreased fuel efficiency, so it is not advisable to ignore it.

Discuss the causes and fixes for P0327 2001 Toyota Highlander OBDII Code

Code P0327 2001 Toyota Highlander comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play