AutoCodes – Honda – P0326 2019 Honda CR-V

P0326 2019 Honda CR-V Code - Knock Sensor Malfunction

Quick Answer

A non-resonant type of knock sensor is used, and it is mounted on the cylinder block to detect engine knocking. Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0326 2019 Honda CR-V indicates Knock Sensor Malfunction.
Common causes
Common causes include Faulty Knock Sensor, Knock Sensor harness is open or shorted, Knock Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 214
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 16, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0326 2019 Honda CR-V Description

A non-resonant type of knock sensor is used, and it is mounted on the cylinder block to detect engine knocking. Vibration from engine combustion causes the torus-shaped weight to compress the ceramic element in the non-resonant knock sensor, and converts it into electrical signals. The Powertrain Control Module (PCM) controls the ignition timing according to the electrical signal level. If the signal level from the knock sensor drops for a set time because of a poor connection at the knock sensor, or a bad sensor, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0326 2019 Honda CR-V - Knock Sensor Malfunction - AutoCodes.com
P0326 2019 Honda CR-V Code - Knock Sensor Malfunction

What are the Possible Causes of the DTC P0326 2019 Honda CR-V?

  • Faulty Knock Sensor
  • Knock Sensor harness is open or shorted
  • Knock Sensor circuit poor electrical connection

How to Fix the DTC P0326 2019 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0326 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0326 2019 Honda CR-V code?

Need more information on how to fix the P0326 2019 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0326 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0326 2019 Honda CR-V Code

1. What does OBDII code P0326 mean on a 2019 Honda CR-V?

P0326 indicates a malfunction in the knock sensor or its circuit, which detects engine knocking and helps optimize ignition timing.

2. What are the symptoms of code P0326 on a 2019 Honda CR-V?

Common symptoms include reduced engine performance, poor fuel economy, engine knocking noises, and an illuminated Check Engine Light.

3. What causes code P0326 on a 2019 Honda CR-V?

Possible causes include a faulty knock sensor, damaged wiring or connectors to the sensor, excessive engine noise, or an ECM/PCM issue.

4. Can I drive my 2019 Honda CR-V with code P0326?

Driving with P0326 is possible but not recommended, as it can lead to poor performance and potential engine damage if knocking persists.

5. How do I fix code P0326 on a 2019 Honda CR-V?

Repairs may include replacing the knock sensor, repairing damaged wiring, addressing excessive engine noise, or reprogramming the ECM/PCM.

6. How much does it cost to fix code P0326 on a 2019 Honda CR-V?

Repair costs can range from $150 to $400, depending on whether the knock sensor or associated wiring needs replacement.

7. Where is the knock sensor located on a 2019 Honda CR-V?

The knock sensor is typically located on the engine block, cylinder head, or intake manifold, near the combustion chambers.

8. Can a dirty engine cause code P0326 on a 2019 Honda CR-V?

Yes, excessive carbon buildup or engine deposits can lead to abnormal combustion noises, triggering the knock sensor and P0326 code.

9. Does clearing the P0326 code fix the issue on a 2019 Honda CR-V?

Clearing the code resets the Check Engine Light but does not fix the underlying problem; proper diagnosis and repair are necessary.

10. How is code P0326 diagnosed on a 2019 Honda CR-V?

A technician will use a scan tool to verify the code, inspect the knock sensor and wiring, and check for related engine or ECM issues.

Discuss the causes and fixes for P0326 2019 Honda CR-V OBDII Code

Code P0326 2019 Honda CR-V comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play