P0320 KIA Code - Ignition/Distributor Engine Speed Input Circuit
Quick Answer
Ignition failure sensor is used to check whether the spark ignition is occurred correctly or not and also used to tachometer drive. Common causes include Faulty Ignition/Distributor engine speed sensor, Faulty Crankshaft Position sensor, Ignition/Distributor engine speed sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0320 KIA indicates Ignition/Distributor Engine Speed Input Circuit.
- Common causes
- Common causes include Faulty Ignition/Distributor engine speed sensor, Faulty Crankshaft Position sensor, Ignition/Distributor engine speed sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0320 KIA Description
What are the Possible Causes of the DTC P0320 KIA?
- Faulty Ignition/Distributor engine speed sensor
- Faulty Crankshaft Position sensor
- Ignition/Distributor engine speed sensor harness is open or shorted
- Ignition/Distributor engine speed sensor circuit poor electrical connection
- Low battery charge
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0320 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0320 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0320 KIA code?
Need more information on how to fix the P0320 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0320 KIA code diagnosed by a professional: Find a repair shop in your area
Information for Specific KIA Models
- P0320 2006 KIA Optima — Ignition/Distributor Engine Speed Input Circuit
Frequently Asked Questions about P0320 KIA Code
1. What does the OBDII code P0320 mean on a KIA?
P0320 indicates an issue with the Ignition/Distributor Engine Speed Input Circuit, which monitors engine speed and position for proper ignition timing.
2. What are the common symptoms of the P0320 code in a KIA?
Symptoms may include engine stalling, rough idling, difficulty starting, a lack of power, or the Check Engine Light turning on.
3. What causes the P0320 code to appear in a KIA vehicle?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed ignition module, or issues with the PCM (Powertrain Control Module).
4. Can I drive my KIA with the P0320 code?
It’s not recommended to drive with this code active, as it can lead to stalling or unsafe driving conditions due to engine performance issues.
5. How is the P0320 code diagnosed in a KIA?
A technician will use a scan tool to read the code, visually inspect the wiring and connectors, and test the crankshaft position sensor or ignition module for proper operation.
6. How do I fix the P0320 code in a KIA?
Repairs may involve replacing the crankshaft position sensor, repairing damaged wiring, replacing the ignition module, or reprogramming/updating the PCM.
7. What tools are needed to fix the P0320 code in a KIA?
You may need an OBDII scanner, a multimeter to check electrical connections, and basic hand tools for replacing sensors or repairing wiring.
8. How much does it cost to fix the P0320 code on a KIA?
The cost can vary, but replacing a crankshaft position sensor typically costs $150–$300, including parts and labor.
9. Can a dirty or faulty connector cause the P0320 code in a KIA?
Yes, a corroded or loose connector can disrupt the signal from the crankshaft position sensor or ignition module, triggering the code.
10. Will resetting the Check Engine Light clear the P0320 code in a KIA?
Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0320 KIA OBDII Code
-
gnition distributor engine speed input error what are some of the things can i do to get check engine light to go off
i think that it has some thing to do with the gas cap -
I have a p0320 and I have misfire codes on all six cylinders as well and the tachometer has not been working for couple months but just started back as the van started running rough.
-
Let me check if I can find more information. What model and year is your KIA?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
