AutoCodes – Ford – P0320 2011 Ford Focus

P0320 2011 Ford Focus Code - Ignition/Distributor Engine Speed Input Circuit Malfunction

Quick Answer

The ignition engine speed sensor input signal to Powertrain Control Module (PCM) is continuously monitored. Common causes include Faulty Ignition/Distributor engine speed sensor, Faulty Crankshaft Position sensor, Ignition/Distributor engine speed sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0320 2011 Ford Focus indicates Ignition/Distributor Engine Speed Input Circuit Malfunction.
Common causes: Common causes include Faulty Ignition/Distributor engine speed sensor, Faulty Crankshaft Position sensor, Ignition/Distributor engine speed sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,920

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0320 2011 Ford Focus Description

The ignition engine speed sensor input signal to Powertrain Control Module (PCM) is continuously monitored. The test fails when the signal indicates two successive erratic profile ignition pickup (PIP) pulses occurred.

OBDII Code P0320 2011 Ford Focus - Ignition/Distributor Engine Speed Input Circuit Malfunction - AutoCodes.com — P0320 2011 Ford Focus Code - Ignition/Distributor Engine Speed Input Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0320 2011 Ford Focus?

Faulty Ignition/Distributor engine speed sensor
Faulty Crankshaft Position sensor
Ignition/Distributor engine speed sensor harness is open or shorted
Ignition/Distributor engine speed sensor circuit poor electrical connection (Loose wires/connectors)
Low battery charge
Faulty Engine Control Module (ECM)

How to Fix the DTC P0320 2011 Ford Focus?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0320 2011 Ford Focus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0320 2011 Ford Focus code?

Need more information on how to fix the P0320 2011 Ford Focus code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0320 2011 Ford Focus code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0320 2011 Ford Focus Code

1. What are the common symptoms of OBDII code P0320 in a 2011 Ford Focus?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and potential loss of power while driving.

2. What does the OBDII code P0320 in a 2011 Ford Focus indicate?

- This code indicates an ignition/distributor engine speed input circuit malfunction.

3. What are the possible causes of OBDII code P0320 in a 2011 Ford Focus?

- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the circuit, a defective ignition coil, or a malfunctioning engine control module (ECM).

4. How can I diagnose the source of OBDII code P0320 in my 2011 Ford Focus?

- To diagnose this code, you can perform a visual inspection of the wiring and connectors, test the crankshaft position sensor, check the ignition coil, and scan the ECM for any related trouble codes.

5. Can I still drive my 2011 Ford Focus with OBDII code P0320?

- It is not recommended to drive the vehicle with this code present, as it can lead to further damage and potential safety issues. It is best to address the issue promptly.

6. How can I repair OBDII code P0320 in my 2011 Ford Focus?

- Repairing this code may involve replacing the crankshaft position sensor, repairing damaged wiring or connectors, replacing the ignition coil, or reprogramming the ECM if necessary.

7. Will resetting the OBDII code P0320 in my 2011 Ford Focus make it go away permanently?

- Simply resetting the code may temporarily clear the check engine light, but if the underlying issue is not addressed and fixed, the code is likely to return.

8. Is it possible for a DIY enthusiast to fix OBDII code P0320 in a 2011 Ford Focus?

- Depending on your skill level and access to tools, you may be able to address this code yourself by following repair guides and using proper diagnostic equipment.

9. How much does it typically cost to repair OBDII code P0320 in a 2011 Ford Focus at a repair shop?

- The cost of repairing this code can vary depending on the exact cause and the shop's labor rates, but it may range from $100 to $300 or more, including parts and labor.

10. Can OBDII code P0320 in a 2011 Ford Focus cause damage to other engine components if left unaddressed?

- Yes, leaving this code unresolved can potentially cause damage to other engine components, reduce fuel efficiency, and lead to more severe drivability issues over time.