P0316 2011 FORD FUSION Code - Misfire Detected On Startup First 1000 Revolutions
|P0316 2011 FORD FUSION code possible causes
- Faulty Crankshaft Position (CKP)
- Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Ignition System
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Faulty Engine Control Module (ECM)
|How do I fix the P0316 2011 FORD FUSION code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the P0316 2011 FORD FUSION code
Labor: 1.0The cost of diagnosing the P0316 2011 FORD FUSION code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0316 2011 FORD FUSION code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine fails to start
- Engine runs rough
|P0316 2011 FORD FUSION code descriptionThe Crankshaft Position (CKP) sensor signal is monitored by the Engine Control Module (ECM) for errors. The P0316 code is set when ECM is detects a misfire during the first 1,000 revolution test interval following engine start.
|Need more information with the P0316 2011 FORD FUSION code?Need more information on how to fix the P0316 2011 FORD FUSION code? Get Access to Factory Service Manuals
|Need help with a P0316 2011 FORD FUSION code?Get the P0316 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
|P0316 2011 FORD FUSION code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0316 2011 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks