AutoCodes – Ford – P0316 2008 Ford Fusion

P0316 2008 Ford Fusion Code - Misfire Detected On Startup First 1000 Revolutions

Quick Answer

The Crankshaft Position (CKP) sensor signal is monitored by the Engine Control Module (ECM) for errors. Common causes include Faulty Crankshaft Position (CKP), Crankshaft Position (CKP) sensor harness is open or shorted, Crankshaft Position (CKP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0316 2008 Ford Fusion indicates Misfire Detected On Startup First 1000 Revolutions .
Common causes: Common causes include Faulty Crankshaft Position (CKP), Crankshaft Position (CKP) sensor harness is open or shorted, Crankshaft Position (CKP) sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,833

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0316 2008 Ford Fusion Description

The Crankshaft Position (CKP) sensor signal is monitored by the Engine Control Module (ECM) for errors. The P0316 code is set when ECM is detects a misfire during the first 1,000 revolution test interval following engine start.

OBDII Code P0316 2008 Ford Fusion - Misfire Detected On Startup First 1000 Revolutions - AutoCodes.com — P0316 2008 Ford Fusion Code - Misfire Detected On Startup First 1000 Revolutions

What does this mean?

What are the Possible Causes of the DTC P0316 2008 Ford Fusion?

Faulty Crankshaft Position (CKP)
Crankshaft Position (CKP) sensor harness is open or shorted
Crankshaft Position (CKP) sensor circuit poor electrical connection
Ignition System
Fuel Injectors
Running out of fuel
Fuel Quality
Faulty Engine Control Module (ECM)

How to Fix the DTC P0316 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0316 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0316 2008 Ford Fusion code?

Need more information on how to fix the P0316 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0316 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0316 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0316 in a 2008 Ford Fusion?

- Common symptoms include rough idle, engine misfire on startup, and potential stalling during the first 1000 revolutions.

2. What causes the OBDII code P0316 in a 2008 Ford Fusion?

- The code is typically triggered by a misfire detected by the powertrain control module (PCM) during the first 1000 engine revolutions after startup.

3. How serious is the misfire detected on startup in a 2008 Ford Fusion?

- While the vehicle may still be operable, a misfire can lead to decreased fuel efficiency, potential damage to the catalytic converter, and increased exhaust emissions.

4. How can I diagnose the misfire issue associated with code P0316 in my 2008 Ford Fusion?

- Diagnosing the issue involves checking ignition system components such as spark plugs, ignition coils, and the fuel system.

5. Can a dirty or faulty fuel injector cause code P0316 in a 2008 Ford Fusion?

- Yes, a dirty or malfunctioning fuel injector can contribute to a misfire detected during startup, triggering code P0316.

6. What are some repair tips for addressing code P0316 in a 2008 Ford Fusion?

- Start by inspecting and replacing spark plugs, ignition coils, and fuel injectors if necessary. Ensure proper engine maintenance and use high-quality fuel.

7. Is it safe to continue driving with OBDII code P0316 in a 2008 Ford Fusion?

- While it may be safe to drive in the short term, it is recommended to address the misfire issue promptly to prevent further damage to the engine or emissions system.

8. Can a faulty crankshaft position sensor cause code P0316 in a 2008 Ford Fusion?

- Yes, a malfunctioning crankshaft position sensor can lead to misfire detection during startup and trigger OBDII code P0316.

9. How can I reset the OBDII code P0316 in my 2008 Ford Fusion after making repairs?

- After addressing the underlying issue causing the misfire, you can reset the code using an OBDII scanner or by disconnecting the car battery for a few minutes.

10. Should I seek professional help to diagnose and repair OBDII code P0316 in my 2008 Ford Fusion?

- If you are not experienced with diagnosing engine misfires or do not have the necessary tools, it is recommended to consult a qualified mechanic for proper diagnosis and repair of code P0316.