P0315 1998 FORD F150 Code - Crankshaft Position System Variation Not Learned
|P0315 1998 FORD F150 code possible causes
- Faulty Crankshaft Position (CKP)
- Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Damaged crankshaft pulse wheel teeth
|How do I fix the P0315 1998 FORD F150 code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0315 1998 FORD F150 code tech notesVisual inspection of the Crankshaft Position (CKP) sensor and crankshaft pulse wheel teeth for damage. If crankshaft teethes are OK, replaced the Crankshaft Position sensor.
|Cost of diagnosing the P0315 1998 FORD F150 code
Labor: 1.0The cost of diagnosing the P0315 1998 FORD F150 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0315 1998 FORD F150 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine fails to start
- Engine runs rough
|P0315 1998 FORD F150 code descriptionThe Crankshaft Position (CKP) sensor signal is monitored by the Engine Control Module (ECM) for errors. The P0315 code is set when ECM is unable to learn and correct for mechanical inaccuracies in crankshaft pulse wheel tooth spacing.
|Need more information with the P0315 1998 FORD F150 code?Need more information on how to fix the P0315 1998 FORD F150 code? Get Access to Factory Service Manuals
|Need help with a P0315 1998 FORD F150 code?Get the P0315 1998 Ford F150 code diagnosed by a professional: Find a repair shop in your area
|P0315 1998 FORD F150 code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0315 1998 Ford F150 code? Have you replaced any parts?
Any information is appreciated. Thanks