P0314 Code - Single Cylinder Misfire
Quick Answer
P0314 indicates Single Cylinder Misfire . Common causes for P0314 include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0314 indicates Single Cylinder Misfire .
- Common causes
- Common causes for P0314 include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0314 Description
How to Fix the DTC P0314?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0314 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0314 code?
Need more information on how to fix the P0314 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0314 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0314 Code
1. What does OBDII code P0314 mean?
P0314 indicates a single cylinder misfire, meaning one specific cylinder is not firing properly, causing engine performance issues.
2. What are the common symptoms of code P0314?
Symptoms include rough idling, reduced engine power, poor fuel economy, hesitation during acceleration, and possibly an illuminated check engine light.
3. What causes a single cylinder misfire associated with P0314?
Common causes include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, low cylinder compression, or issues with the crankshaft position sensor.
4. Can I drive my vehicle with code P0314 active?
While you may be able to drive, it’s not recommended as prolonged misfires can damage the catalytic converter and cause further engine problems.
5. How do I diagnose the cause of code P0314?
Start by inspecting the spark plugs, ignition coils, and fuel injectors for damage or wear. Use a scan tool to identify which cylinder is misfiring and perform a compression test if needed.
6. How do I fix code P0314?
Repairs may include replacing faulty spark plugs, ignition coils, or fuel injectors, repairing vacuum leaks, or addressing engine mechanical issues like low compression.
7. Can a dirty fuel injector cause code P0314?
Yes, a clogged or dirty fuel injector can prevent proper fuel delivery to a specific cylinder, leading to a misfire and triggering P0314.
8. Does code P0314 always mean a mechanical issue?
No, it can also be caused by electrical problems, such as a faulty ignition coil or wiring issues, rather than mechanical faults.
9. Will fixing P0314 improve my fuel economy?
Yes, resolving the misfire can restore proper combustion, improving fuel efficiency and engine performance.
10. How much does it cost to repair code P0314?
Repair costs vary depending on the cause but can range from $100 for spark plug replacement to $500 or more for injector or mechanical repairs.
Discuss the causes and fixes for P0314 OBDII Code
Code P0314 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
