P0310 Mercedes-Benz Code - Cylinder 10 Misfire Detected
Quick Answer
Misfire is defined as a lack of combustion in a cylinder due to the absence of a spark, incorrect fuel metering, low compression, or any other cause. Common causes include Faulty Spark Plug #10, Clogged or faulty Fuel Injector #10, Faulty Ignition Coil #10. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0310 Mercedes-Benz indicates Cylinder 10 Misfire Detected.
- Common causes
- Common causes include Faulty Spark Plug #10, Clogged or faulty Fuel Injector #10, Faulty Ignition Coil #10.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0310 Mercedes-Benz Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
The Malfunction Indicator Lamp (MIL) blinks once per second when detecting a misfire severe enough to cause catalyst damage. If the MIL is in a steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test.
This Diagnostic Trouble Code (DTC) sets when the misfire detection monitor detects an engine misfire in cylinder 10.
What are the Possible Causes of the DTC P0310 Mercedes-Benz?
- Faulty Spark Plug #10
- Clogged or faulty Fuel Injector #10
- Faulty Ignition Coil #10
- Fuel Injector #10 harness is open or shorted
- Fuel Injector #10 circuit poor electrical connection
- Ignition Coil #10 harness is open or shorted
- Ignition Coil #10 circuit poor electrical connection
- Insufficient cylinder 10 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0310 Mercedes-Benz?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0310 Mercedes-Benz code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0310 Mercedes-Benz code?
Need more information on how to fix the P0310 Mercedes-Benz code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0310 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0310 Mercedes-Benz Code
1. What are the common symptoms of OBDII code P0310 (Cylinder 10 Misfire Detected) in a Mercedes-Benz?
- Common symptoms include engine misfiring, rough idling, loss of power, and potentially increased fuel consumption.
2. What are the possible causes of OBDII code P0310 in a Mercedes-Benz?
- The code P0310 usually indicates issues such as a faulty ignition coil, spark plug, fuel injector, vacuum leak, or low compression in cylinder 10 of the engine.
3. How can I diagnose the cause of OBDII code P0310 in my Mercedes-Benz?
- Diagnosing the issue involves checking the ignition coil, spark plug, fuel injector, vacuum lines, and performing a compression test on cylinder 10 to identify the root cause of the misfire.
4. Can driving with OBDII code P0310 (Cylinder 10 Misfire Detected) damage my Mercedes-Benz?
- Continuing to drive with a misfire can potentially cause damage to the catalytic converter, oxygen sensor, or other engine components over time, so it's best to address the issue promptly.
5. Are there any DIY repair tips for fixing OBDII code P0310 in a Mercedes-Benz?
- DIY repair tips may include replacing the spark plug, ignition coil, or fuel injector in cylinder 10, checking and repairing any vacuum leaks, and ensuring proper compression in the affected cylinder.
6. Should I reset the OBDII code P0310 after making repairs to my Mercedes-Benz?
- Yes, after making repairs to address the misfire in cylinder 10, it's recommended to clear the error code using an OBDII scanner to reset the Check Engine Light.
7. How much does it typically cost to repair OBDII code P0310 in a Mercedes-Benz?
- The cost of repairing code P0310 can vary depending on the specific cause of the misfire, but it may involve expenses for parts such as ignition coils, spark plugs, fuel injectors, and labor costs for diagnosis and repair.
8. Is it safe to drive my Mercedes-Benz with OBDII code P0310 if the symptoms are not severe?
- While driving with a mild misfire may be possible for a short period, it's generally recommended to address the issue promptly to prevent potential damage to the engine or emissions system.
9. Can a dirty or clogged fuel injector cause OBDII code P0310 in a Mercedes-Benz?
- Yes, a dirty or clogged fuel injector in cylinder 10 can disrupt the air-fuel mixture, leading to a misfire and triggering the OBDII code P0310 in a Mercedes-Benz.
10. How long does it typically take to repair OBDII code P0310 in a Mercedes-Benz at a professional auto repair shop?
- The repair time for code P0310 can vary depending on the exact cause of the misfire, but it may take a few hours to a full day for diagnosis, parts replacement, and testing at a professional auto repair shop.
Discuss the causes and fixes for P0310 Mercedes-Benz OBDII Code
Code P0310 Mercedes-Benz comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
