AutoCodes – RAM – P0307 Ram

P0307 Ram Code - Cylinder 7 Misfire Detected

Quick Answer

The Engine Control Module (ECM) uses information from the crankshaft position sensor and the camshaft position sensor to determine when an engine cylinder misfire is occurring. Common causes include Faulty spark plug 7, Clogged or faulty fuel injector 7, Faulty ignition coil 7. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0307 Ram indicates Cylinder 7 Misfire Detected.
Common causes: Common causes include Faulty spark plug 7, Clogged or faulty fuel injector 7, Faulty ignition coil 7.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,260

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0307 Ram Description

The Engine Control Module (ECM) uses information from the crankshaft position sensor and the camshaft position sensor to determine when an engine cylinder misfire is occurring. By monitoring variations in the crankshaft rotation speed for each cylinder, the ECM can detect individual cylinder misfire events.
Extreme cylinder misfire events can cause catalytic converter damage. The malfunction indicator lamp (MIL) will flash when the conditions for catalytic converter damage are present. The Diagnostic Trouble Codes (DTC) P0307 correspond to cylinders 7. When the ECM detects that one or more specific cylinders are misfiring, the DTC for the respective misfiring cylinder will set, and up to 2 of the corresponding fuel injectors are disabled for a minimum of 30 s. The ECM will then re-enable the fuel injector and, after approximately 200 engine revolutions, will determine if the misfire is still present. If the misfire is still present, the ECM will disable the fuel injector again repeating the process. If the misfire is not present, the fuel injector will remain enabled by the ECM. In Spark Ignition Direct Injection (SIDI) system applications, if a fuel injector fault DTC is set during a misfire event, the ECM will not re-enable the injector.

OBDII Code P0307 Ram - Cylinder 7 Misfire Detected - AutoCodes.com — P0307 Ram Code - Cylinder 7 Misfire Detected

What does this mean?

What are the Possible Causes of the DTC P0307 Ram?

Faulty spark plug 7
Clogged or faulty fuel injector 7
Faulty ignition coil 7
Fuel injector 7 harness is open or shorted
Fuel injector 7 circuit poor electrical connection
Ignition coil 7 harness is open or shorted
Ignition coil 7 circuit poor electrical connection
Insufficient cylinder 7 compression
Incorrect fuel pressure
Intake air leak

How to Fix the DTC P0307 Ram?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0307 code means that cylinder 7 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder 7. If the problem persists more tests need to be done to diagnose the problem, see "Possible Causes".

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0307 Ram code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0307 Ram code?

Need more information on how to fix the P0307 Ram code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0307 Ram code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0307 Ram Code

1. What are the common symptoms of OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Common symptoms include engine misfiring, rough idling, lack of power, and potentially increased fuel consumption.

2. What are the possible causes of OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- The misfire in cylinder 7 could be caused by issues such as a faulty spark plug, ignition coil, fuel injector, vacuum leak, or low compression.

3. How can I diagnose the cause of OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Diagnosing the issue may involve inspecting and testing the spark plug, ignition coil, fuel injector, vacuum lines, and performing a compression test on cylinder 7.

4. Can a dirty fuel injector cause OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Yes, a dirty or clogged fuel injector can lead to a misfire in cylinder 7, triggering the OBDII code P0307.

5. Is it safe to continue driving with OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- It is not recommended to drive with a misfire, as it can cause further damage to the engine and emissions system. It's best to address the issue promptly.

6. How do I repair OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Repairing the issue may involve replacing the spark plug, ignition coil, fuel injector, fixing vacuum leaks, or addressing any underlying mechanical issues causing the misfire.

7. Can a bad ignition coil cause OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Yes, a faulty ignition coil can lead to a misfire in cylinder 7, triggering the OBDII code P0307. Replacing the ignition coil may resolve the issue.

8. What role does cylinder 7 play in the engine?

- Cylinder 7 is one of the individual combustion chambers in the engine where air and fuel are mixed, compressed, and ignited to generate power. A misfire in this cylinder can disrupt engine performance.

9. How important is it to address OBDII code P0307 Ram (Cylinder 7 Misfire Detected) promptly?

- It is crucial to address this issue promptly to prevent potential damage to the engine, catalytic converter, and to ensure optimal performance and fuel efficiency.

10. Can a low compression in cylinder 7 cause OBDII code P0307 Ram (Cylinder 7 Misfire Detected)?

- Yes, low compression in cylinder 7 can lead to a misfire and trigger the OBDII code P0307. It's important to diagnose and address any compression issues.

1. What are the common symptoms of OBDII code P0307 (Cylinder 7 Misfire Detected) in a Ram?

- Common symptoms include engine misfiring, rough idling, loss of power, increased fuel consumption, and potential engine vibration.

2. What are the possible causes of a Cylinder 7 misfire in a Ram triggering code P0307?

- Possible causes include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, low compression, or issues with the engine control module.

3. How can I diagnose the cause of a Cylinder 7 misfire in my Ram with code P0307?

- Diagnostic steps may include checking spark plugs, ignition coils, fuel injectors, compression levels, vacuum leaks, and performing a scan tool test for further troubleshooting.

4. Can a dirty or clogged fuel injector cause a Cylinder 7 misfire in a Ram?

- Yes, a dirty or clogged fuel injector can disrupt the fuel supply to the cylinder, leading to a misfire and triggering code P0307.

5. What are some repair tips for addressing OBDII code P0307 in a Ram with a Cylinder 7 misfire?

- Repair tips may include replacing spark plugs, ignition coils, fuel injectors, addressing vacuum leaks, performing a compression test, and ensuring proper engine control module function.

6. Is it safe to continue driving my Ram with OBDII code P0307 (Cylinder 7 Misfire Detected)?

- It is not recommended to drive with a misfire as it can cause damage to the catalytic converter and other engine components. Immediate attention is advised.

7. Can a Cylinder 7 misfire be intermittent and still trigger OBDII code P0307 in a Ram?

- Yes, intermittent misfires can still trigger the OBDII code P0307 if the misfire occurs frequently enough to be detected by the vehicle's onboard diagnostic system.

8. How important is it to address a Cylinder 7 misfire related to OBDII code P0307 promptly?

- Promptly addressing a misfire is crucial to prevent potential damage to the engine, exhaust system, and other components. Ignoring the issue can lead to more costly repairs.

9. Are there any specific maintenance tasks that can help prevent Cylinder 7 misfires in a Ram?

- Regular maintenance tasks such as replacing spark plugs, checking ignition components, and ensuring proper fuel system function can help prevent Cylinder 7 misfires and OBDII code P0307.

10. Can weather conditions or driving habits contribute to a Cylinder 7 misfire triggering code P0307 in a Ram?

- Extreme weather conditions, poor driving habits, or lack of regular maintenance can contribute to Cylinder 7 misfires and trigger OBDII code P0307 in a Ram.