P0306 Hyundai Code - Cylinder 6 Misfire Detected
Quick Answer
When a misfire occurs, engine speed will fluctuate. Common causes include Faulty spark plug 6, Clogged or faulty fuel injector 6, Faulty ignition coil 6. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0306 Hyundai indicates Cylinder 6 Misfire Detected.
- Common causes
- Common causes include Faulty spark plug 6, Clogged or faulty fuel injector 6, Faulty ignition coil 6.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0306 Hyundai Description
What are the Possible Causes of the DTC P0306 Hyundai?
- Faulty spark plug 6
- Clogged or faulty fuel injector 6
- Faulty ignition coil 6
- Fuel injector 6 harness is open or shorted
- Fuel injector 6 circuit poor electrical connection
- Ignition coil 6 harness is open or shorted
- Ignition coil 6 circuit poor electrical connection
- Insufficient cylinder 6 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0306 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0306 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0306 Hyundai code?
Need more information on how to fix the P0306 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0306 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0306 Hyundai Code
1. What are the common symptoms of OBDII code P0306 in a Hyundai, indicating Cylinder 6 misfire detected?
- Common symptoms include rough idling, loss of power, engine vibration, and potential hesitation or jerking during acceleration.
2. What are some possible causes of OBDII code P0306 in a Hyundai?
- Potential causes include faulty ignition coil, worn spark plugs, clogged fuel injector, vacuum leaks, low compression in cylinder 6, or issues with the engine control module.
3. How can I diagnose the specific cause of the Cylinder 6 misfire in my Hyundai triggering code P0306?
- Diagnostic steps may involve inspecting and testing the ignition coil, spark plugs, fuel injector, compression levels in cylinder 6, checking for vacuum leaks, and scanning the engine control module for error codes.
4. Are there any DIY repair tips for addressing OBDII code P0306 in a Hyundai related to Cylinder 6 misfire?
- DIY repair tips may include replacing the faulty ignition coil or spark plugs, cleaning or replacing the clogged fuel injector, performing a compression test on cylinder 6, and checking for vacuum leaks.
5. Can driving with OBDII code P0306 indicating Cylinder 6 misfire harm my Hyundai's engine?
- Continuing to drive with a misfire can potentially lead to damage to the catalytic converter, reduced fuel efficiency, and further engine issues if left unresolved for an extended period.
6. How urgent is it to address OBDII code P0306 related to Cylinder 6 misfire in a Hyundai?
- It is recommended to address the issue promptly to prevent potential damage to the engine components and ensure optimal performance and fuel efficiency of the vehicle.
7. Is it necessary to reset the OBDII code P0306 after repairing the Cylinder 6 misfire issue in a Hyundai?
- It is advisable to clear the error code using an OBDII scanner after addressing the misfire problem to reset the Check Engine Light and monitor if the issue has been resolved.
8. Can extreme weather conditions contribute to triggering OBDII code P0306 in a Hyundai due to Cylinder 6 misfire?
- Extreme temperatures or humidity can sometimes exacerbate existing issues leading to a Cylinder 6 misfire, so it is essential to ensure proper maintenance and address any underlying problems.
9. What role does regular maintenance play in preventing OBDII code P0306 related to Cylinder 6 misfire in a Hyundai?
- Regular maintenance, including timely spark plug replacements, ignition system checks, and fuel injector cleanings, can help prevent issues that may trigger a misfire in cylinder 6 and the associated OBDII code.
10. Are there any recalls or service bulletins related to OBDII code P0306 and Cylinder 6 misfire in Hyundai vehicles?
- It is advisable to check with Hyundai dealership or official sources for any recalls or service bulletins related to this specific issue to ensure proper identification and resolution of the problem.
Discuss the causes and fixes for P0306 Hyundai OBDII Code
-
2006 hyundai sonata 6 cyl 3.3 engine
Replaced intake manifold gaskets, and all six plugs, and O2 sensors (both upstream). Cleared codes, drove for about 4 or 5 miles, all is well. Got to 75 mph, and the check engine light came on & immediately started flashing. Codes show random cylinder misfire, misfire on cylinder 3, misfire on cylinder 6. Swapped ignition coils on cylinders 4 & 6, cleared codes, & drove. Flashing CE light again. Codes still identify cylinders 3 and 6, eliminating the coil as the cause. MAP is showing 8 inHg.
Suggestions? How do I test manifold for leak, and would that cause these symptoms? No codes appear other than misfires.
Thanks
Sandy
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
