P0306 2012 Ford Fusion Code - Cylinder 6 Misfire Detected
Quick Answer
Misfire is defined as a lack of combustion in a cylinder due to the absence of a spark, incorrect fuel metering, low compression, or any other cause. Common causes include Faulty spark plug 6, Clogged or faulty fuel injector 6, Faulty ignition coil 6. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0306 2012 Ford Fusion indicates Cylinder 6 Misfire Detected.
- Common causes
- Common causes include Faulty spark plug 6, Clogged or faulty fuel injector 6, Faulty ignition coil 6.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0306 2012 Ford Fusion Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
The Malfunction Indicator Lamp (MIL) blinks once per second when detecting a misfire severe enough to cause catalyst damage. If the MIL is in a steady state due to a misfire, this indicates the threshold for emissions was exceeded and caused the vehicle to fail an inspection and maintenance tailpipe test.
This Diagnostic Trouble Code (DTC) sets when the misfire detection monitor detects an engine misfire in cylinder 6.
What are the Possible Causes of the DTC P0306 2012 Ford Fusion?
- Faulty spark plug 6
- Clogged or faulty fuel injector 6
- Faulty ignition coil 6
- Fuel injector 6 harness is open or shorted
- Fuel injector 6 circuit poor electrical connection
- Ignition coil 6 harness is open or shorted
- Ignition coil 6 circuit poor electrical connection
- Insufficient cylinder 6 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0306 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0306 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0306 2012 Ford Fusion code?
Need more information on how to fix the P0306 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0306 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0306 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0306 in a 2012 Ford Fusion?
- Common symptoms include engine misfires, rough idling, loss of power, and potential engine vibrations.
2. What are the possible causes of a cylinder 6 misfire detected in a 2012 Ford Fusion?
- Potential causes can include faulty spark plugs, a malfunctioning ignition coil, a clogged fuel injector, vacuum leaks, or low compression in the cylinder.
3. How can I diagnose the cause of the cylinder 6 misfire in my 2012 Ford Fusion?
- Diagnosis typically involves checking spark plugs, ignition coils, fuel injectors, vacuum lines, and performing a compression test on cylinder 6 to pinpoint the issue.
4. Can a dirty or clogged fuel injector cause OBDII code P0306 in a 2012 Ford Fusion?
- Yes, a dirty or clogged fuel injector can disrupt the air-fuel mixture in cylinder 6, leading to a misfire and triggering the P0306 trouble code.
5. Is driving with OBDII code P0306 in a 2012 Ford Fusion safe?
- It is not recommended to drive with a misfire, as it can cause further damage to the engine and affect overall performance. Address the issue promptly.
6. How can I repair OBDII code P0306 in my 2012 Ford Fusion?
- Repair methods may include replacing spark plugs, ignition coils, fuel injectors, addressing vacuum leaks, or performing a cylinder compression test to determine the root cause.
7. Can a faulty ignition coil be the sole reason for OBDII code P0306 in a 2012 Ford Fusion?
- Yes, a faulty ignition coil specific to cylinder 6 can cause a misfire and trigger the P0306 trouble code on a 2012 Ford Fusion.
8. Will resetting the OBDII code P0306 in my 2012 Ford Fusion make the issue disappear?
- Resetting the code may temporarily clear the check engine light, but it will not fix the underlying problem causing the cylinder 6 misfire.
9. How much does it typically cost to repair OBDII code P0306 in a 2012 Ford Fusion?
- Repair costs can vary depending on the exact cause of the misfire, but expect to pay for parts and labor, with an average range of $100 to $500 or more.
10. Can neglecting OBDII code P0306 lead to further damage to the engine of a 2012 Ford Fusion?
- Ignoring the misfire indicated by code P0306 can lead to increased fuel consumption, potential catalytic converter damage, and other engine-related issues if left unresolved.
Discuss the causes and fixes for P0306 2012 Ford Fusion OBDII Code
Code P0306 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
