AutoCodes – Toyota – P0305 2008 Toyota Camry

P0305 2008 Toyota Camry Code - Cylinder 5 Misfire Detected

Quick Answer

When the engine misfires, high concentrations of hydrocarbons (HC) enter the exhaust gas. Common causes include Faulty spark plug 5, Clogged or faulty fuel injector 5, Faulty ignition coil 5. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0305 2008 Toyota Camry indicates Cylinder 5 Misfire Detected.
Common causes: Common causes include Faulty spark plug 5, Clogged or faulty fuel injector 5, Faulty ignition coil 5.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,191

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0305 2008 Toyota Camry Description

When the engine misfires, high concentrations of hydrocarbons (HC) enter the exhaust gas. Extremely high HC concentration levels can cause increases in exhaust emission levels. High concentrations of HC can also cause increases in the Three-Way Catalytic Converter (TWC) temperature, which may cause damage to the TWC. To prevent these increases in emissions and to limit the possibility of thermal damage, the ECM monitors the misfire rate. When the temperature of the TWC reaches the point of thermal degradation, the ECM blinks the MIL. To monitor misfires, the ECM uses both the Camshaft Position (CMP) sensor and the Crankshaft Position (CKP) sensor. The CMP sensor is used to identify any misfiring cylinders and the CKP sensor is used to measure variations in the crankshaft rotation speed. Misfires are counted as when the crankshaft rotation speed variations exceed predetermined thresholds. If the misfire rate exceeds the threshold level, and could cause emission deterioration, the ECM illuminates the MIL and sets a DTC.

OBDII Code P0305 2008 Toyota Camry - Cylinder 5 Misfire Detected - AutoCodes.com — P0305 2008 Toyota Camry Code - Cylinder 5 Misfire Detected

What does this mean?

What are the Possible Causes of the DTC P0305 2008 Toyota Camry?

Faulty spark plug 5
Clogged or faulty fuel injector 5
Faulty ignition coil 5
Fuel injector 5 harness is open or shorted
Fuel injector 5 circuit poor electrical connection
Ignition coil 5 harness is open or shorted
Ignition coil 5 circuit poor electrical connection
Insufficient cylinder 5 compression
Incorrect fuel pressure
Intake air leak

How to Fix the DTC P0305 2008 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0305 code means that the cylinder 5 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder 5. If the problem persists more tests needs to be done to diagnose problem, see "Possible Causes"

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0305 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0305 2008 Toyota Camry code?

Need more information on how to fix the P0305 2008 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0305 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0305 2008 Toyota Camry Code

1. What are the common symptoms of OBDII code P0305 on a 2008 Toyota Camry?

- Common symptoms include engine misfires, rough idle, loss of power, and increased fuel consumption.

2. What are the possible causes of a cylinder 5 misfire detected in a 2008 Toyota Camry?

- Potential causes include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, low compression, or a problem with the engine control module.

3. How can I diagnose the source of a cylinder 5 misfire in my 2008 Toyota Camry?

- To diagnose the issue, you can perform a visual inspection of spark plugs and ignition coils, conduct a compression test, check for vacuum leaks, and use a scan tool to monitor live data.

4. Can driving with a cylinder 5 misfire damage my 2008 Toyota Camry?

- Continuing to drive with a misfire can lead to catalytic converter damage, reduced engine performance, and potentially more severe engine issues over time.

5. What is the typical cost to repair a cylinder 5 misfire in a 2008 Toyota Camry?

- The cost of repair can vary depending on the underlying cause, but it may range from $100 to $500 for parts and labor.

6. How often should I replace spark plugs in a 2008 Toyota Camry to prevent misfires?

- It is recommended to replace spark plugs every 30,000 to 60,000 miles to maintain optimal engine performance and prevent misfires.

7. Can a DIY enthusiast fix a cylinder 5 misfire issue in a 2008 Toyota Camry?

- Some repairs related to a cylinder 5 misfire, such as replacing spark plugs or ignition coils, can be done by DIY enthusiasts with the necessary tools and knowledge.

8. Will resetting the OBDII code P0305 on a 2008 Toyota Camry make the issue go away?

- Resetting the code may temporarily turn off the Check Engine light, but it will not fix the underlying problem causing the cylinder 5 misfire.

9. What is the recommended course of action if OBDII code P0305 keeps returning on a 2008 Toyota Camry?

- If the code keeps returning, it is important to thoroughly diagnose and address the root cause of the cylinder 5 misfire to prevent further issues.

10. Is it safe to drive my 2008 Toyota Camry with a flashing Check Engine light due to a cylinder 5 misfire?

- A flashing Check Engine light indicates a severe misfire that can cause damage to the catalytic converter. It is not safe to drive the vehicle in this condition and should be addressed immediately.