P0304 Mitsubishi Code - Cylinder 4 Misfire Condition
Quick Answer
When a misfire occurs, engine speed will fluctuate. Common causes include Faulty Spark Plug #4, Clogged or faulty Fuel Injector #4, Faulty Ignition Coil #4. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0304 Mitsubishi indicates Cylinder 4 Misfire Condition.
- Common causes
- Common causes include Faulty Spark Plug #4, Clogged or faulty Fuel Injector #4, Faulty Ignition Coil #4.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0304 Mitsubishi Description
What are the Possible Causes of the DTC P0304 Mitsubishi?
- Faulty Spark Plug #4
- Clogged or faulty Fuel Injector #4
- Faulty Ignition Coil #4
- Fuel Injector #4 harness is open or shorted
- Fuel Injector #4 circuit poor electrical connection
- Ignition Coil #4 harness is open or shorted
- Ignition Coil #4 circuit poor electrical connection
- Insufficient cylinder 4 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0304 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0304 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0304 Mitsubishi code?
Need more information on how to fix the P0304 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0304 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0304 Mitsubishi Code
1. What are the common symptoms of OBDII code P0304 in a Mitsubishi indicating a Cylinder 4 misfire condition?
The common symptoms include rough idling, loss of power, engine vibration, and potentially increased fuel consumption.
2. What are the possible causes of a Cylinder 4 misfire in a Mitsubishi triggering the OBDII code P0304?
Potential causes can include faulty spark plugs or ignition coils, a clogged fuel injector, vacuum leaks, low compression in the cylinder, or issues with the engine's timing.
3. How can I diagnose the specific cause of the Cylinder 4 misfire code P0304 in my Mitsubishi?
You can start by inspecting and testing the spark plugs, ignition coils, fuel injector, compression in Cylinder 4, and checking for any vacuum leaks in the intake system.
4. Can driving with OBDII code P0304 indicating a Cylinder 4 misfire damage my Mitsubishi's engine?
Continuing to drive with a misfire can potentially cause damage to the catalytic converter, so it's best to address the issue promptly to prevent further problems.
5. Is it safe to continue driving my Mitsubishi with the check engine light on due to code P0304?
While the vehicle may still be operable with a misfire condition, it's recommended to have the issue addressed as soon as possible to prevent any potential damage and ensure optimal performance.
6. How much does it typically cost to repair a Cylinder 4 misfire condition causing the OBDII code P0304 in a Mitsubishi?
The cost of repair can vary depending on the specific cause of the misfire, but it may involve replacing spark plugs, ignition coils, a fuel injector, or performing more extensive engine diagnostics.
7. Can I reset the OBDII code P0304 related to a Cylinder 4 misfire in my Mitsubishi using a diagnostic scanner?
Resetting the code with a diagnostic scanner may temporarily clear the check engine light, but it will not fix the underlying issue causing the misfire. It's essential to diagnose and repair the problem to prevent the code from reoccurring.
8. Are there any maintenance tips to prevent Cylinder 4 misfires and OBDII code P0304 in my Mitsubishi?
Regularly scheduled maintenance such as replacing spark plugs, ignition coils, and fuel filters at recommended intervals can help prevent misfire issues. Also, using high-quality fuel and keeping up with engine tune-ups can aid in preventing cylinder misfires.
9. Will a Cylinder 4 misfire causing OBDII code P0304 affect my Mitsubishi's emissions and cause it to fail an emissions test?
Yes, a misfire can lead to increased emissions, potentially causing your Mitsubishi to fail an emissions test. It's crucial to address the misfire promptly to ensure your vehicle meets emission standards.
10. Can extreme weather conditions or altitude changes contribute to a Cylinder 4 misfire and trigger the OBDII code P0304 in my Mitsubishi?
Extreme weather conditions or altitude changes can impact engine performance and potentially lead to misfire issues. Ensuring your vehicle is properly maintained and tuned for specific conditions can help mitigate these issues.
Discuss the causes and fixes for P0304 Mitsubishi OBDII Code
Code P0304 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
