AutoCodes – Toyota – P0302 2015 Toyota RAV4

P0302 2015 Toyota RAV4 Code - Cylinder 2 Misfire Detected

Quick Answer

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Common causes include Intake air leak, Faulty spark plug #2, Faulty ignition coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0302 2015 Toyota RAV4 indicates Cylinder 2 Misfire Detected.
Common causes: Common causes include Intake air leak, Faulty spark plug #2, Faulty ignition coil #2.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,612

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 25, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0302 2015 Toyota RAV4 Description

When the engine misfires, high concentrations of Hydrocarbons (HC) enter the exhaust gas. Extremely high hydrocarbon concentration levels can cause an increase in exhaust emission levels. Extremely high concentrations of hydrocarbons can also cause increases in the three-way catalytic converter temperature, which may cause damage to the three-way catalytic converter. To prevent this increase in emissions and to limit the possibility of thermal damage, the Engine Control Module (ECM) monitors the misfire count. When the temperature of the three-way catalytic converter reaches the point of thermal degradation, the ECM blinks the MIL. To monitor misfires, the ECM uses both the camshaft position sensor and the crankshaft position sensor. The camshaft position sensor is used to identify any misfiring cylinders and the crankshaft position sensor is used to measure variations in the crankshaft rotation speed. Misfires are counted when the crankshaft rotation speed variations exceed predetermined thresholds. If the misfire count exceeds the threshold levels and could cause emission control system performance deterioration, the ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0302 2015 Toyota RAV4 - Cylinder 2 Misfire Detected - AutoCodes.com — P0302 2015 Toyota RAV4 Code - Cylinder 2 Misfire Detected

What does this mean?

What are the Possible Causes of the DTC P0302 2015 Toyota RAV4?

Intake air leak
Faulty spark plug #2
Faulty ignition coil #2
Clogged or faulty fuel injector #2
Fuel injectors #2 harness is open or shorted
Fuel Injectors #2 circuit poor electrical connection
Ignition coils #2 harness is open or shorted
Ignition coils #2 circuit poor electrical connection
Incorrect Fuel pressure
Faulty Mass Air Flow (MAF) Sensor
Faulty Engine Control Module (ECM)
Faulty Engine Coolant Temperature (ECT) Sensor

How to Fix the DTC P0302 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0302 code means that cylinder #2 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder #2. If the problem persists more tests need to be done to diagnose the problem. See "Possible Causes" for the most common problems.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0302 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0302 2015 Toyota RAV4 code?

Need more information on how to fix the P0302 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0302 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0302 2015 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0302 in a 2015 Toyota RAV4?

A: Common symptoms of code P0302, indicating a cylinder 2 misfire in a 2015 Toyota RAV4, include rough idling, decreased fuel efficiency, and noticeable engine vibration.

2. What can cause a cylinder 2 misfire in a 2015 Toyota RAV4?

A: Potential causes of a cylinder 2 misfire in a 2015 Toyota RAV4 can include faulty spark plugs, a malfunctioning ignition coil, a clogged fuel injector, or low compression in the cylinder.

3. How can I diagnose the cylinder 2 misfire in my 2015 Toyota RAV4?

A: To diagnose a cylinder 2 misfire in a 2015 Toyota RAV4, you can use a scan tool to read the OBDII code, perform a visual inspection of spark plugs and ignition components, and conduct a compression test on the affected cylinder.

4. Can driving with a cylinder 2 misfire damage my 2015 Toyota RAV4?

A: Driving with a cylinder 2 misfire in a 2015 Toyota RAV4 can potentially lead to catalytic converter damage, decreased engine performance, and increased fuel consumption if left unresolved.

5. How can I repair a cylinder 2 misfire in my 2015 Toyota RAV4?

A: Repairing a cylinder 2 misfire in a 2015 Toyota RAV4 may involve replacing spark plugs, ignition coils, or fuel injectors, as well as addressing any underlying issues such as vacuum leaks or engine timing problems.

6. Is it safe to continue driving my 2015 Toyota RAV4 with OBDII code P0302?

A: It is not recommended to drive your 2015 Toyota RAV4 with OBDII code P0302 (cylinder 2 misfire) as it can lead to further damage to the engine components and affect overall vehicle performance.

7. How much does it typically cost to fix a cylinder 2 misfire in a 2015 Toyota RAV4?

A: The cost to fix a cylinder 2 misfire in a 2015 Toyota RAV4 can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.

8. Can a dirty air filter cause OBDII code P0302 in a 2015 Toyota RAV4?

A: While a dirty air filter is not a direct cause of cylinder 2 misfire (P0302) in a 2015 Toyota RAV4, it can impact engine performance and fuel efficiency, potentially contributing to the issue.

9. Will resetting the OBDII code P0302 in my 2015 Toyota RAV4 make the issue go away?

A: Resetting the OBDII code P0302 in a 2015 Toyota RAV4 may temporarily turn off the check engine light, but it will not fix the underlying problem causing the cylinder 2 misfire.

10. How often should I check and replace spark plugs in my 2015 Toyota RAV4 to prevent cylinder misfires?

A: It is generally recommended to check and replace spark plugs in a 2015 Toyota RAV4 every 30,000 to 100,000 miles, depending on the type of spark plugs used and driving conditions to help prevent cylinder misfires like code P0302.