P0302 2013 Nissan Rogue Code - Number 2 Cylinder Misfire Detected
Quick Answer
When a misfire occurs, engine speed will fluctuate. Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0302 2013 Nissan Rogue indicates Number 2 Cylinder Misfire Detected.
- Common causes
- Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0302 2013 Nissan Rogue Description
What are the Possible Causes of the DTC P0302 2013 Nissan Rogue?
- Faulty Spark Plug #2
- Clogged or faulty Fuel Injector #2
- Faulty Ignition Coil #2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
- Ignition Coil #2 harness is open or shorted
- Ignition Coil #2 circuit poor electrical connection
- Insufficient cylinder 2 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0302 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0302 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0302 2013 Nissan Rogue code?
Need more information on how to fix the P0302 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0302 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0302 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0302 in a 2013 Nissan Rogue?
- Common symptoms include engine rough idle, loss of power, hesitation or jerking during acceleration, and potential engine misfires.
2. What does the OBDII code P0302 for a 2013 Nissan Rogue mean?
- The code P0302 indicates a misfire in the number 2 cylinder of the engine, specifically in this case, the 2013 Nissan Rogue.
3. What are the possible causes of a number 2 cylinder misfire in a 2013 Nissan Rogue?
- Potential causes of a cylinder 2 misfire include faulty spark plugs, ignition coil issues, fuel injector problems, vacuum leaks, or low compression in the cylinder.
4. How can I diagnose the cause of a P0302 code in my 2013 Nissan Rogue?
- Diagnosing the code may involve checking spark plugs, ignition coils, fuel injectors, vacuum leaks, and performing a compression test on the number 2 cylinder.
5. Can driving with a P0302 code in a 2013 Nissan Rogue cause further damage?
- Continuing to drive with a cylinder misfire can potentially cause damage to the catalytic converter and other engine components, so it's best to address the issue promptly.
6. How can I repair a number 2 cylinder misfire in my 2013 Nissan Rogue?
- Repairing a cylinder misfire may involve replacing spark plugs, ignition coils, or fuel injectors, fixing vacuum leaks, or addressing any underlying engine compression issues.
7. Is it safe to reset the OBDII code P0302 in a 2013 Nissan Rogue without fixing the issue?
- It's not recommended to simply reset the code without addressing the underlying problem, as the issue may persist and potentially lead to more serious engine problems.
8. Can bad gasoline quality cause a number 2 cylinder misfire in a 2013 Nissan Rogue?
- Poor quality gasoline or contaminated fuel can indeed contribute to cylinder misfires, so using high-quality fuel and additives can help prevent such issues.
9. How often should I replace spark plugs in a 2013 Nissan Rogue to prevent a cylinder misfire?
- It's generally recommended to replace spark plugs every 30,000 to 50,000 miles as part of routine maintenance to help prevent misfires and maintain engine efficiency.
10. Will a cylinder misfire affect the fuel economy of a 2013 Nissan Rogue?
- Yes, a cylinder misfire can lead to decreased fuel economy due to inefficient combustion, causing the engine to work harder and consume more fuel.
Discuss the causes and fixes for P0302 2013 Nissan Rogue OBDII Code
Code P0302 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
