AutoCodes – Toyota – P0302 2007 Toyota Highlander

P0302 2007 Toyota Highlander Code - Cylinder 2 Misfire Detected

Quick Answer

When a misfire occurs, engine speed will fluctuate. Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0302 2007 Toyota Highlander indicates Cylinder 2 Misfire Detected.
Common causes: Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,590

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0302 2007 Toyota Highlander Description

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.

OBDII Code P0302 2007 Toyota Highlander - Cylinder 2 Misfire Detected - AutoCodes.com — P0302 2007 Toyota Highlander Code - Cylinder 2 Misfire Detected

What does this mean?

What are the Possible Causes of the DTC P0302 2007 Toyota Highlander?

Faulty Spark Plug #2
Clogged or faulty Fuel Injector #2
Faulty Ignition Coil #2
Fuel Injector #2 harness is open or shorted
Fuel Injector #2 circuit poor electrical connection
Ignition Coil #2 harness is open or shorted
Ignition Coil #2 circuit poor electrical connection
Insufficient cylinder 2 compression
Incorrect fuel pressure
Intake air leak

How to Fix the DTC P0302 2007 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0302 code means that the cylinder 2 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder 2. If the problem persists more tests needs to be done to diagnose problem, see "Possible Causes"

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0302 2007 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0302 2007 Toyota Highlander code?

Need more information on how to fix the P0302 2007 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0302 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0302 2007 Toyota Highlander Code

1. What does OBDII code P0302 mean for a 2007 Toyota Highlander?

This code indicates a misfire in cylinder 2 of the engine.

2. What are the common symptoms of a cylinder 2 misfire in a 2007 Toyota Highlander?

Common symptoms include rough idling, loss of power, engine vibration, and potential fuel efficiency issues.

3. What are the possible causes of a P0302 code in a 2007 Toyota Highlander?

Potential causes include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, or low compression in the cylinder.

4. How can I diagnose the cause of a cylinder 2 misfire in my 2007 Toyota Highlander?

Diagnosis typically involves checking spark plugs, ignition coils, fuel injectors, compression levels, and performing a visual inspection for any obvious issues.

5. Can driving with a P0302 code in a 2007 Toyota Highlander cause further damage?

Continuing to drive with a misfire can potentially damage the catalytic converter and other engine components over time.

6. How can I repair a cylinder 2 misfire in my 2007 Toyota Highlander?

Repair steps may involve replacing spark plugs, ignition coils, fuel injectors, or addressing any underlying issues that are causing the misfire.

7. Is it safe to continue driving my 2007 Toyota Highlander with a P0302 code?

It is not recommended to drive with a misfire as it can lead to further damage and potential safety hazards.

8. How much does it typically cost to fix a cylinder 2 misfire in a 2007 Toyota Highlander?

The cost of repair can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars.

9. Can I reset the OBDII code P0302 in my 2007 Toyota Highlander without fixing the issue?

Resetting the code without addressing the underlying problem will likely result in the code reappearing once the issue persists.

10. How often should I perform maintenance to prevent cylinder misfires in my 2007 Toyota Highlander?

Regular maintenance, including replacing spark plugs, checking ignition components, and addressing any engine issues promptly, can help prevent cylinder misfires.