P0302 2005 Nissan Altima Sedan Code - Number 2 Cylinder Misfire Detected
Quick Answer
When a misfire occurs, engine speed will fluctuate. Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0302 2005 Nissan Altima Sedan indicates Number 2 Cylinder Misfire Detected.
- Common causes
- Common causes include Faulty Spark Plug #2, Clogged or faulty Fuel Injector #2, Faulty Ignition Coil #2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0302 2005 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0302 2005 Nissan Altima Sedan?
- Faulty Spark Plug #2
- Clogged or faulty Fuel Injector #2
- Faulty Ignition Coil #2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
- Ignition Coil #2 harness is open or shorted
- Ignition Coil #2 circuit poor electrical connection
- Insufficient cylinder 2 compression
- Incorrect fuel pressure
- Intake air leak
How to Fix the DTC P0302 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0302 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0302 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0302 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0302 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0302 2005 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0302 (Number 2 Cylinder Misfire Detected) in a 2005 Nissan Altima Sedan?
The common symptoms of code P0302 in a 2005 Nissan Altima Sedan include rough idling, engine vibration, loss of power, and potential engine stalling.
2. What are the possible causes of a number 2 cylinder misfire in a 2005 Nissan Altima Sedan?
Common causes of a number 2 cylinder misfire in a 2005 Nissan Altima Sedan can include faulty spark plugs, ignition coils, fuel injectors, vacuum leaks, or low compression in the cylinder.
3. How can I diagnose the source of the number 2 cylinder misfire in my 2005 Nissan Altima Sedan?
To diagnose the source of the misfire, you can perform a visual inspection of spark plugs and ignition coils, check for vacuum leaks, conduct a compression test, and use a scan tool to monitor live data and pinpoint the issue.
4. Are there any DIY repair tips for addressing OBDII code P0302 in a 2005 Nissan Altima Sedan?
DIY repair tips for code P0302 include replacing spark plugs, ignition coils, or fuel injectors if they are found to be faulty, checking for vacuum leaks, and ensuring proper engine compression.
5. Can driving with OBDII code P0302 in a 2005 Nissan Altima Sedan cause further damage?
Continuing to drive with code P0302 in a 2005 Nissan Altima Sedan can potentially lead to damage to the catalytic converter, oxygen sensors, or other engine components over time if left unresolved.
6. Is it safe to ignore OBDII code P0302 in a 2005 Nissan Altima Sedan?
It is not recommended to ignore code P0302 in a 2005 Nissan Altima Sedan as it can lead to poor engine performance, decreased fuel efficiency, and potential long-term damage if the underlying issue is not addressed.
7. How much does it typically cost to repair OBDII code P0302 in a 2005 Nissan Altima Sedan?
The cost to repair code P0302 in a 2005 Nissan Altima Sedan can vary depending on the underlying cause, but expenses may include parts such as spark plugs, ignition coils, or fuel injectors, as well as labor costs if professional assistance is needed.
8. Will resetting the OBDII code P0302 in a 2005 Nissan Altima Sedan make the issue go away?
Resetting the code may temporarily clear the check engine light, but if the underlying issue causing the misfire is not addressed, the code is likely to reappear as the vehicle's onboard diagnostic system detects the ongoing problem.
9. Can extreme weather conditions contribute to OBDII code P0302 in a 2005 Nissan Altima Sedan?
Extreme weather conditions such as cold temperatures or high humidity can sometimes exacerbate existing issues that may lead to a number 2 cylinder misfire in a 2005 Nissan Altima Sedan.
10. How often should I perform maintenance checks to prevent OBDII code P0302 in my 2005 Nissan Altima Sedan?
Regular maintenance checks, including inspecting and replacing spark plugs, ignition coils, and other relevant components according to the manufacturer's recommended intervals, can help prevent OBDII code P0302 in a 2005 Nissan Altima Sedan.
Discuss the causes and fixes for P0302 2005 Nissan Altima Sedan OBDII Code
-
I have a 2005 Altima 3.5SE with 187k miles... Received a P0302 (misfire #2 Cylinder). I know a lot of people say to replace the plugs, coils etc... I would recommend looking for an air leak first! This is what my issue was and it was a $30 part fix from the dealership and now my car runs even faster like it was new again!
After you remove the black plastic 3.5 engine cover, you will see the shiny front fuel rail that supplies the three front cyliners. The fuel flows in that rail from the drivers side to the passenger side of the vehicle, you will notice that the #2 cylinder is on the far left (passenger side front) in which gets the fuel last on that rail.
On that fuel rail inbetween the three front cyliners you will see a round type part with two screws etc... That part is called a "Fuel Injector Pressure Dampner" and it is suppose to smooth out the turbulence in the fuel rail. This is where I had an air leak and hence the misfire on my #2 cylinder in which fuel is supplied after that dampner.
As I originally took off the plastic 3.5 engine cover, I could see where a little fuel had been leaking on and around the dampner and it was full of wet dirt from the leak. it's Simple DIY fix. Keep in mind that there are two of these dampners, the other one is on the drivers side where the rail splits and it dampens the rear rail (but remember we are only interested in cylinder #2). Each dampner has a different part number. No need to change them unless you see a leak, black wet dirt will be on and around them.
Good Luck!
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
