AutoCodesHonda – P0301 2020 Honda CR-V

P0301 2020 Honda CR-V Code - No. 1 Cylinder Misfire Detected

Quick Answer

The crankshaft vibrates slightly when each cylinder fires. Common causes include Valve adjustment, Faulty spark plug #1, Faulty ignition coil #1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0301 2020 Honda CR-V indicates No. 1 Cylinder Misfire Detected.
Common causes
Common causes include Valve adjustment, Faulty spark plug #1, Faulty ignition coil #1.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 374
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 16, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0301 2020 Honda CR-V Description

The crankshaft vibrates slightly when each cylinder fires. If a misfire occurs, the crankshaft rotation speed changes rapidly. The Powertrain Control Module (PCM) monitors the crankshaft rotation speed based on the output pulses from the Crankshaft Position (CKP) Sensor. By monitoring changes in the crankshaft rotation speed, the PCM counts the number of misfires and determines which cylinder is misfiring. If a misfire is detected, a Diagnostic Trouble Code (DTC) is stored.
There are two types of misfire detection: Type 1: When the number of misfires per 200 engine revolutions reaches the level that can damage the three-way catalyst (TWC), a DTC is stored and the MIL blinks. Type 2: When the number of misfires per 1,000 engine revolutions reaches the level that affects exhaust emissions but is not severe enough to immediately damage the catalyst, a DTC is stored, and the MIL comes on.
OBDII Code P0301 2020 Honda CR-V - No. 1 Cylinder Misfire Detected - AutoCodes.com
P0301 2020 Honda CR-V Code - No. 1 Cylinder Misfire Detected

What are the Possible Causes of the DTC P0301 2020 Honda CR-V?

  • Valve adjustment
  • Faulty spark plug #1
  • Faulty ignition coil #1
  • Clogged or faulty fuel injector #1
  • Intake air leak
  • Insufficient cylinder #1 compression
  • Incorrect fuel pressure

How to Fix the DTC P0301 2020 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0301 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0301 2020 Honda CR-V code?

Need more information on how to fix the P0301 2020 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0301 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0301 2020 Honda CR-V Code

1. What does the OBDII code P0301 mean in a 2020 Honda CR-V?

P0301 indicates a misfire has been detected in cylinder No. 1, which can affect engine performance and efficiency.

2. What are the common symptoms of a P0301 code in a 2020 Honda CR-V?

Symptoms include rough idling, engine hesitation, reduced power, poor fuel economy, and the Check Engine Light turning on.

3. What can cause a P0301 code in a 2020 Honda CR-V?

Common causes include a faulty spark plug, ignition coil, fuel injector issues, vacuum leaks, low compression, or a malfunctioning ECM.

4. Can I drive my 2020 Honda CR-V with a P0301 code?

Driving with a P0301 code is not recommended as it can lead to further engine damage, reduced performance, and increased emissions.

5. How do I fix a P0301 code on a 2020 Honda CR-V?

Repairs may involve replacing the spark plug or ignition coil for cylinder No. 1, cleaning or replacing the fuel injector, or addressing vacuum leaks.

6. How do you diagnose the P0301 code in a 2020 Honda CR-V?

A mechanic will check the spark plug, ignition coil, and fuel injector for cylinder No. 1, inspect for vacuum leaks, and perform a compression test if necessary.

7. Can a dirty air filter cause a P0301 code in a 2020 Honda CR-V?

While unlikely, a severely clogged air filter can restrict airflow and contribute to misfires, but it's not a primary cause of P0301.

8. How much does it cost to repair a P0301 code on a 2020 Honda CR-V?

Costs vary depending on the issue, but replacing a spark plug or ignition coil typically costs between $100 and $300.

9. Could a P0301 code be caused by bad fuel in my 2020 Honda CR-V?

Yes, contaminated or low-quality fuel can cause misfires, including in cylinder No. 1, and may trigger a P0301 code.

10. Can a failing oxygen sensor cause a P0301 code in a 2020 Honda CR-V?

A failing oxygen sensor can lead to improper air-fuel mixture, which may contribute to misfires, but it’s not a direct cause of P0301.

Discuss the causes and fixes for P0301 2020 Honda CR-V OBDII Code

Code P0301 2020 Honda CR-V comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play