AutoCodesGMC – P0301 2017 GMC Sierra

P0301 2017 GMC Sierra Code - Cylinder 1 Misfire Detected

Quick Answer

A misfiring cylinder causes slight variations in the rotational speed of the crankshaft. Common causes include Faulty Spark Plug #1, Clogged or faulty Fuel Injector #1, Faulty Ignition Coil #1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0301 2017 GMC Sierra indicates Cylinder 1 Misfire Detected.
Common causes
Common causes include Faulty Spark Plug #1, Clogged or faulty Fuel Injector #1, Faulty Ignition Coil #1.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 620
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 21, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0301 2017 GMC Sierra Description

A misfiring cylinder causes slight variations in the rotational speed of the crankshaft. The Engine Control Module (ECM) can detect these variations by closely monitoring the crankshaft position sensor signal. The signals of the camshaft position sensors are used to determine which cylinder is misfiring. If the ECM detects a misfire rate sufficient to cause emission levels to exceed mandated standards, the Diagnostic Trouble Code (DTC) will be set. Under certain driving conditions, a misfire rate can be high enough to cause the catalytic converter to overheat, damaging the converter. The Malfunction Indicator Lamp (MIL) flashes when the converter is overheating, damaging conditions are present, and the DTC is set. The DTC will be set when the ECM detects a crankshaft rotation speed variation indicating a single-cylinder misfire rate sufficient to cause emissions levels to exceed mandated standards.
OBDII Code P0301 2017 GMC Sierra - Cylinder 1 Misfire Detected - AutoCodes.com
P0301 2017 GMC Sierra Code - Cylinder 1 Misfire Detected

What are the Possible Causes of the DTC P0301 2017 GMC Sierra?

  • Faulty Spark Plug #1
  • Clogged or faulty Fuel Injector #1
  • Faulty Ignition Coil #1
  • Fuel Injector #1 harness is open or shorted
  • Fuel Injector #1 circuit poor electrical connection
  • Ignition Coil #1 harness is open or shorted
  • Ignition Coil #1 circuit poor electrical connection
  • Insufficient cylinder 1 compression
  • Incorrect fuel pressure
  • Intake air leak

How to Fix the DTC P0301 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0301 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0301 2017 GMC Sierra code?

Need more information on how to fix the P0301 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0301 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0301 2017 GMC Sierra Code

What does the OBDII code P0301 mean for a 2017 GMC Sierra?

P0301 indicates a misfire was detected in cylinder 1, meaning the engine is not firing properly in that cylinder.

What are the symptoms of a P0301 code in a 2017 GMC Sierra?

Symptoms can include rough idling, reduced engine power, poor fuel economy, and the check engine light turning on.

What causes the P0301 code in a 2017 GMC Sierra?

Common causes include faulty spark plugs, ignition coil issues, a clogged fuel injector, low cylinder compression, or vacuum leaks.

Can I drive my 2017 GMC Sierra with a P0301 code?

Driving with a P0301 code is possible, but it can lead to further engine damage if not addressed promptly.

How can I fix the P0301 code in my 2017 GMC Sierra?

Fixes may include replacing spark plugs, ignition coils, or fuel injectors, checking for vacuum leaks, or performing a compression test.

What tools do I need to diagnose a P0301 code?

You’ll need an OBDII scanner to read the code and basic tools like a spark plug socket, multimeter, and possibly a compression tester.

How much does it cost to repair a P0301 code on a 2017 GMC Sierra?

Costs vary depending on the issue, ranging from $50 for spark plugs to several hundred dollars for fuel injector or ignition coil replacements.

Can bad fuel cause a P0301 code in a 2017 GMC Sierra?

Yes, poor-quality or contaminated fuel can cause cylinder misfires, leading to a P0301 code.

Is a P0301 code related to engine timing issues?

While rare, incorrect timing due to a faulty timing chain or belt can contribute to cylinder misfires like P0301.

How can I prevent a P0301 code on my 2017 GMC Sierra?

Regular maintenance, including spark plug replacement, fuel system cleaning, and using high-quality fuel, can help prevent cylinder misfires.

Discuss the causes and fixes for P0301 2017 GMC Sierra OBDII Code

Code P0301 2017 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play