P0300 BUICK - Cylinder Misfire Detected Random Cylinders
P0300 BUICK Possible Causes
- Faulty spark plug (s)
- Faulty ignition coil (s)
- Clogged or faulty fuel injector (s)
- Intake air leak
- Fuel injectors harness is open or shorted
- Fuel Injectors circuit poor electrical connection
- Ignition coils harness is open or shorted
- Ignition coils circuit poor electrical connection
- Insufficient cylinders compression
- Incorrect fuel pressure
First diagnose P0300 BUICK code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0300 BUICK Tech NotesThe P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are a common caused of multi-cylinder misfiring. If no leak is found the next step is to replace the spark plugs. If the problem persists more tests needs to be done to diagnose the problem, see "Possible Causes".
There is a factory service bulletin for the following Buick models:
2000-2008 Buick Century
2000-2008 Buick LeSabre
2000-2008 Buick Park Avenue
2000-2008 Buick Regal
2002-2008 Buick Rendezvous
2000-2008 Buick Factory Service Bulletin OBDII Code P0300
User Submitted Video
Cost of diagnosing the P0300 BUICK code
Labor: 1.0The cost of diagnosing the P0300 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0300 BUICK code detected?The control module monitors the crankshaft speed and has detected a misfire condition
P0300 BUICK Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
P0300 Buick DescriptionWhen a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
P0300 BUICK More InformationNeed more information on how to fix the P0300 BUICK code?
Get Access to Factory Service Manuals
Need more help?Get the P0300 Buick code diagnosed by a professional: Find a repair shop in your area
P0300 BUICK CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0300 Buick code? Have you replaced any parts?
Any information is appreciated. Thanks